Looking at seats...

[CTScott]

Originally Posted by MGargano

So it's as straight-forward as it sounds? Just plug the resistor into the two pins in the connector and voila?

Yes - Plug it in, and tape or heat shrink it.

[MGargano]

Originally Posted by CTScott

Yes - Plug it in, and tape or heat shrink it.

Ok so of course my local Radio Shack doesn't have 3 ohm resistors. Will a 3.3k ohm resistor work? Are they they same? Some had a 'k' and some had an 'm' and some just said 'ohms'

[CTScott]

Originally Posted by MGargano

Ok so of course my local Radio Shack doesn't have 3 ohm resistors. Will a 3.3k ohm resistor work? Are they they same? Some had a 'k' and some had an 'm' and some just said 'ohms'

You want just ohms (k=1000's, M=millions). 3.3 ohms would be fine, but not 3.3 K or 3.3 M. The resistors should be 1/2 watt rated ones as well (they come in 1/8, 1/4, 1/2, etc).

[MGargano]

Originally Posted by CTScott

You want just ohms (k=1000's, M=millions). 3.3 ohms would be fine, but not 3.3 K or 3.3 M. The resistors should be 1/2 watt rated ones as well (they come in 1/8, 1/4, 1/2, etc).

If their website is any indicator, it looks like Radio Shack doesn't carry these at all. Looks like I've got some hunting to do, unless I want to order them online and pay $hipping. Thanks for the info though!