GI: "YarGauge" replacement clock module (Digital Tach, etc.) - Toyota Yaris Forums

CTScott · 09-02-2009, 04:34 PM

OK. So far it looks like I'll keep the clock function. The other function that I am thinking of adding is inside and outside temperature.

I will also be experimenting with 1 line vs 2 line LCDs to see what will fit in the slot that the clock peeks through. the slot is actually about 1 5/8" x 5/8", so it may be possible to squeeze a 2 line by 8 character LCD in there, which would allow the clock or temp to be displayed simultaneously with one of the other items.

Also, the RPM measurement will be done directly (via the Tach input wire to the meter), rather than through the CAN comm with the ECM. This will make it more responsive than the devices that get it second hand from the ECM.

View Poll Results: Would you buy one?
No	5	5.10%
Yes (for $75)	46	46.94%
Yes (but it would have to be less than $75)	7	7.14%
Yes (but I still want it to also display the time)	40	40.82%
Voters: 98. You may not vote on this poll

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
in dash clock as tach?	Cosmonaut	In Car Entertainment + Electronics (audio / video / alarm)	10	07-12-2010 11:27 AM
digital tach, 52mm, preferably blue leds	severous01	Cosmetic Modifications (Exterior/Interior)	5	05-15-2009 10:58 AM
Digital Tach	nqd	Performance Modifications	4	05-17-2007 12:04 PM

09-02-2009, 04:34 PM	#11
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	OK. So far it looks like I'll keep the clock function. The other function that I am thinking of adding is inside and outside temperature. I will also be experimenting with 1 line vs 2 line LCDs to see what will fit in the slot that the clock peeks through. the slot is actually about 1 5/8" x 5/8", so it may be possible to squeeze a 2 line by 8 character LCD in there, which would allow the clock or temp to be displayed simultaneously with one of the other items. Also, the RPM measurement will be done directly (via the Tach input wire to the meter), rather than through the CAN comm with the ECM. This will make it more responsive than the devices that get it second hand from the ECM.