|
09-07-2009, 05:14 PM | #1 |
Drives: 2008 Red Yaris LB Join Date: Nov 2008
Location: Hicksville, LI
Posts: 125
|
Security- Dome lights
Im setting up a security system on my car and would like to know how to connect the dome lights and neons. Currently I don't think it will be possible without a bunch of relays
I currently have my neons connected to the 4k-2 connector on the ECU which becomes a ground when the doors are open. If I connect my security system to a relay which provides a ground to the neons, when the doors are not open I think I would get a nice hefty spark cause the 4K-2 connector becomes + when doors are not open. I was thinking about connecting the 4K-2 connector to a relay which will provide ground to the neons when doors are open, then also connect the security system to the same relay and it should work but my dome light still wouldn't be on. Damn I wonder why they make this electrical stuff so hard if you have any suggestions please post |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about lights | kaymm | General Yaris / Vitz Discussion | 4 | 04-20-2020 09:10 PM |
BIG driving lights.... how? | jonismyname | Cosmetic Modifications (Exterior/Interior) | 22 | 09-30-2010 07:54 AM |
how to open the dome lights | elijahsami | Australia | 4 | 05-18-2009 04:49 AM |
push dome lights | yarhead | DIY / Maintenance / Service | 1 | 03-02-2009 03:45 PM |
Wiring Cathode to dome lights? | Nexus1155 | DIY / Maintenance / Service | 3 | 09-11-2007 04:10 PM |