headlight aim - Toyota Yaris Forums

sex · 10-12-2009, 01:33 PM

Page LI-102 of the 2007 Service Manual has the procedure

thebarber · 10-12-2009, 01:37 PM

Quote:

Originally Posted by sex

Page LI-102 of the 2007 Service Manual has the procedure

Quote:

Originally Posted by thebarber

has anyone w/ a hatchback adjusted their headlight aim? how do you go about doing it...? i read the toyota manual online, but going an looking at the headlight, do i just spin the white, plastic screw, or do i need to get around the back of the adjuster and turn the scew in there?!?

i read the manual, but looking at it in real life, is the vertical aim adjusted by the white plastic screw, or do i need to get at the back of that adjuster?

Snappy · 10-12-2009, 03:10 PM

White screw. There is nothing additional to adjust at the rear of the lights.
For the US market, there doesn't seem to be any horizontal adjustment whatsoever, the horizontal adjuster screw is replaced with a snap-in post that is blank, and doesn't seem to be easily removable. Is Canada the same? The vertical screw is exposed, faces upwards, and is towards the inside (center of the car) of the headlamp assembly with the hood open.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Projector/HID (sedan)	Brian	DIY / Maintenance / Service	145	02-05-2012 05:13 AM
Silverstar Ultra 9003/HB2 vs OEM headlight bulb comparison	CTScott	DIY / Maintenance / Service	54	02-14-2011 09:58 AM
How To Smoked Sedan Headlight -DIY	zulhizainL902S	DIY / Maintenance / Service	26	01-14-2011 03:12 AM
how the he77 do you aim the headlight!!	marcus	General Yaris / Vitz Discussion	4	04-18-2007 07:58 PM
Headlight fog	elsteverino889	Cosmetic Modifications (Exterior/Interior)	2	03-28-2007 07:38 AM

10-12-2009, 01:33 PM	#1
sex View User's Garage Drives: 09 5DR Join Date: Jul 2009 Location: NY Posts: 310	Page LI-102 of the 2007 Service Manual has the procedure

10-12-2009, 03:10 PM	#3
Snappy Drives: 2 Yaris Hatchbacks Join Date: Dec 2006 Location: Montana Posts: 44	White screw. There is nothing additional to adjust at the rear of the lights. For the US market, there doesn't seem to be any horizontal adjustment whatsoever, the horizontal adjuster screw is replaced with a snap-in post that is blank, and doesn't seem to be easily removable. Is Canada the same? The vertical screw is exposed, faces upwards, and is towards the inside (center of the car) of the headlamp assembly with the hood open.