Got my TWM Short Shifter but...

[punch]

Originally Posted by Katana

...there are some minor differencies between my gearbox and the american Yaris, so I am gonna need your help.

However, I have some questions, cause my gearbox is slightly different than that in the manual.

First difference(driver's side)


Second difference(driver's side)


Third difference


Fourth difference


Fifth difference(passenger's side)


Basically, I need some instructions on how to remove the two screws(pics 1-2) and how to remove the ball(pic 4) cause there is nothing to pull out and I cannot do what steps 7 and on(TWM Manual) say.

Thanks to all!

ok from what i see, and what the twm instructions show, should be very similiar,

1. first remove the shift linkage, which is in your secound picture. (step 3 of twm instructions)

2.then remove whatever is holding the bottom of that item in step 4, not triing to remove the ball from the cup yet.

3. get yourself some spring clip pliers to remove that clip from the pic in #2 picture,

4. once the clip is removed hammer out that pin, the shift assembly looks like it would then pull straight up

good luck