1ZZ TB/Inj/Rail/Coils - Toyota Yaris Forums

Yariz · 04-19-2010, 03:58 PM

Where did you get spacer? I haven't seen a need for it yet. Do you have to change anything other than the injectors? Rail? Also, did you see an improvement?

Gideon · 04-19-2010, 04:08 PM

It came from another YW member who had it custom made. The injectors were added as a result of a CEL which was a lean code, he said after he installed the injectors the code went away.

I installed both TB spacer and injectors at the same time so I can confirm nor deny if there was ever such a condition or if larger injectors solve it.

You don't have to change the rail, stock one works fine. Might want to pick up new injector seals depending on the condition of the ones that are on there currently. Less than $10 for all four, so it's worth it to be safe.

No dyno so no real numbers. Since I installed both a TB spacer and the injectors I can't honestly say which was responsible but it does feel like it pulls harder at WOT.

Gas mileage has not decreased, however at cold start you can smell the difference because of how rich it'll run when warming up.

cruz-gsr · 04-19-2010, 06:33 PM

Quote:

Originally Posted by Yariz

Where did you get spacer? I haven't seen a need for it yet. Do you have to change anything other than the injectors? Rail? Also, did you see an improvement?

i had the spacers made. its a 1nz on one side and 1zz on the other side. i will have another group buy soon.

Yariz · 04-19-2010, 06:38 PM

Quote:

Originally Posted by cruz-gsr

i had the spacers made. its a 1nz on one side and 1zz on the other side. i will have another group buy soon.

Why do I need that? My TB is working fine as is...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1zz injectors suit the S/C just fine	LtNoogie	Forced Induction Forum	51	04-30-2016 11:11 AM
Installed the 1zz throttle body -	AlexNet0	DIY / Maintenance / Service	135	08-01-2014 08:57 AM
For Sale: 1ZZ Throttle Body and 0.25" aluminum wheel spacers	m911gt	Items for Sale by private party	6	04-25-2009 09:52 PM
1ZZ TB and AM Intake	gwasabi	Performance Modifications	5	04-06-2009 08:36 PM
swap for 2zz-ge????	yarisTOONR82	Performance Modifications	12	03-23-2007 08:15 PM

04-19-2010, 03:58 PM	#1
Yariz Banned Drives: Yaris 3dr Hatchback Join Date: Mar 2010 Location: SE Texas Posts: 152	Where did you get spacer? I haven't seen a need for it yet. Do you have to change anything other than the injectors? Rail? Also, did you see an improvement?

04-19-2010, 04:08 PM	#2
Gideon ★weeaboo★ View User's Garage Drives: 2008 Bayou LB Join Date: Oct 2008 Location: Sunnyvale, CA Posts: 661	It came from another YW member who had it custom made. The injectors were added as a result of a CEL which was a lean code, he said after he installed the injectors the code went away. I installed both TB spacer and injectors at the same time so I can confirm nor deny if there was ever such a condition or if larger injectors solve it. You don't have to change the rail, stock one works fine. Might want to pick up new injector seals depending on the condition of the ones that are on there currently. Less than $10 for all four, so it's worth it to be safe. No dyno so no real numbers. Since I installed both a TB spacer and the injectors I can't honestly say which was responsible but it does feel like it pulls harder at WOT. Gas mileage has not decreased, however at cold start you can smell the difference because of how rich it'll run when warming up.