Pre-Purchase check.... - Toyota Yaris Forums

2manywheels · 08-06-2010, 02:43 PM

So.. ripping around on the suspension.
Now ready to pickup some rims.
Going with the RPF1's

With the Tokico reds/progress springs, do you figure I will have any rubbing?

I was thinking of either 195/55/15's or 205/50/15's

I think Garm had suggested these sizes.. But I am probably wrong!!

Will be ordering today, but want to make sure I go with the correct tire sizes!
THX folks
2mw

DeathBeard · 08-06-2010, 03:58 PM

you will have no rubbing issues

MUSKOKA800 · 08-08-2010, 12:34 PM

Quote:

Originally Posted by 2manywheels

So.. ripping around on the suspension.
Now ready to pickup some rims.
Going with the RPF1's

With the Tokico reds/progress springs, do you figure I will have any rubbing?

I was thinking of either 195/55/15's or 205/50/15's

I think Garm had suggested these sizes.. But I am probably wrong!!

Will be ordering today, but want to make sure I go with the correct tire sizes!
THX folks
2mw

205/55/15 would closely match the OEM tire diameter.
195/55/15 and 205/50/15 will be shorter, which may work for you, or may not.

2manywheels · 08-09-2010, 02:28 PM

Ordered on the weekend. TireRack contacted me to confirm that I had selected the tire size I want. They were great to chat with. Hopefully have the rims with Direzza's installed ready to go by the 18th or so(has to cross the border so, not as fast as you guys might be used too!) Now.. to find center caps!!

Iggy888 · 08-09-2010, 11:31 PM

Quote:

Originally Posted by 2manywheels

Now.. to find center caps!!

Brian from good-win-racing.com hooked me up with a set of Helium Center Caps for my Enkei RPF1 15s. I will be putting them on soon.
First I need to figure out what I want to replace the "KÖNIG" sticker with.

This is what they look like:

They are just cheap plastic and not metal but they look like a good match to me. If you are interested, here is link I used to purchase them:

http://www.good-win-racing.com/mazda/miata/21-1064.html

ddongbap · 08-10-2010, 03:15 AM

Lol, how can you guys say NO RUBBING, when he didn't even state the offset?

Klink10 · 08-10-2010, 08:34 AM

IGGY.....does it appear that the Koenig decal can be easily removed? I'm thinking about the same thing but want to run without anything there. Have you put those on yet? Pics?

2manywheels · 08-10-2010, 11:09 AM

ddongbap: Sorry, I know a few of the guys on here were aware they were coming from Tirerack with 35mm offset.
Iggy: thanks man, I will order a set and work on making a plate that matches what the 17" 's enkei would look like ;)

2manywheels · 08-10-2010, 11:17 AM

ddongbap: $24 to ship $36 dollars of center caps... :(
OUCH!!

Iggy888 · 08-11-2010, 08:33 PM

Quote:

Originally Posted by Klink10

IGGY.....does it appear that the Koenig decal can be easily removed? I'm thinking about the same thing but want to run without anything there. Have you put those on yet? Pics?

Klink10: The "KÖNIG" decals are included but not attached (as pictured in the bottom half of the first picture.
You can simply discard them if you do not want to use them.

I haven't put these on yet because I am trying to source a Toyota logo to use in place of the KÖNIG decal.

If I can not find anything suitable I will go with plain silver in the center.
In that case, I might just sand down the KÖNIG raised lettering on each decal, paint them silver and attach.

Klink10 · 08-11-2010, 09:13 PM

So you can just peel the decal of "Konig" off the cap. Doesn't that leave a flat surface with no need to sand?

Iggy888 · 08-12-2010, 01:43 PM

Quote:

Originally Posted by Klink10

So you can just peel the decal of "Konig" off the cap. Doesn't that leave a flat surface with no need to sand?

No, you can not peel the decal of "Konig" off.
I took a closer look and it is actually a round piece of metal with raised letters painted black on one side and adhesive tape on the other. The only thing you could peel off is the adhesive on the back.

If you don't use the decal, you are left with a centre cap which has a hole in the center so you need something to fill the hole in the cap.

Klink10 · 08-15-2010, 09:40 PM

2mw..........Have these come yet? Interested in some pics with your lowering idea as well as stock if you feel in a rush. Thanks

2manywheels · 08-15-2010, 10:36 PM

No, Kyle from Tirerack called me Friday saying that they were hoping to be shipped out of Nevada(friday) So Maybe Wed this week.. I hope!!
Not sure if I am going to need a re-alignment with these being a fair bit wider than stock etc. There is a place here in town that has the Konig center caps, but he isn't sure they are the same as we are looking for. Will swing by Monday or Tuesday afterwork to see.. oh.. hehe.. thats tomorrow. Weekend was too freakin short!!
Also ordered a sprint booster. I got tired of the stupid slow return on the throttle when "off" the gas.. Grrrrrrr

sleey0 · 08-15-2010, 11:10 PM

My throttle response is pretty touchy, especially for a drive-by-wire system.

Mine is a manual, though I am not sure if you have auto or not.

2manywheels · 08-15-2010, 11:18 PM

I have the manual.. I can be driving along at say.. 50mph.. Push the clutch in.. or take it out of gear.. and it will sit at 3000rpm for 30 or more seconds before it will come down.. if I slow down before going into a corner, it feels like I am trail braking.. which in most cases I am not!

08-06-2010, 02:43 PM	#1
2manywheels Drives: 09 YarHB Join Date: Feb 2009 Location: Canada Posts: 175	Pre-Purchase check.... So.. ripping around on the suspension. Now ready to pickup some rims. Going with the RPF1's With the Tokico reds/progress springs, do you figure I will have any rubbing? I was thinking of either 195/55/15's or 205/50/15's I think Garm had suggested these sizes.. But I am probably wrong!! Will be ordering today, but want to make sure I go with the correct tire sizes! THX folks 2mw

08-06-2010, 03:58 PM	#2
DeathBeard Drives: 2010 Yaris S Join Date: Apr 2010 Location: Los Angeles, CA Posts: 574	you will have no rubbing issues __________________ "In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
check engine light twice within a week of purchase??	conurebuddy	General Yaris / Vitz Discussion	8	04-17-2009 11:53 AM
Check Engine Light Question	falkor_99	General Yaris / Vitz Discussion	11	07-22-2007 06:15 PM
Paying for the Yaris with a check?	YotaYarisUSA	New YARIS Purchase Forum	15	07-11-2007 04:31 PM

08-09-2010, 02:28 PM	#4
2manywheels Drives: 09 YarHB Join Date: Feb 2009 Location: Canada Posts: 175	Ordered on the weekend. TireRack contacted me to confirm that I had selected the tire size I want. They were great to chat with. Hopefully have the rims with Direzza's installed ready to go by the 18th or so(has to cross the border so, not as fast as you guys might be used too!) Now.. to find center caps!!

08-10-2010, 03:15 AM	#6
ddongbap Banned Drives: yw calls me douche and racist. Join Date: Aug 2007 Location: hay Posts: 2,183	Lol, how can you guys say NO RUBBING, when he didn't even state the offset?

08-10-2010, 08:34 AM	#7
Klink10 View User's Garage Drives: 2007 Yaris Liftback Join Date: Sep 2007 Location: 910 Posts: 1,229	IGGY.....does it appear that the Koenig decal can be easily removed? I'm thinking about the same thing but want to run without anything there. Have you put those on yet? Pics?

08-10-2010, 11:09 AM	#8
2manywheels Drives: 09 YarHB Join Date: Feb 2009 Location: Canada Posts: 175	ddongbap: Sorry, I know a few of the guys on here were aware they were coming from Tirerack with 35mm offset. Iggy: thanks man, I will order a set and work on making a plate that matches what the 17" 's enkei would look like ;)

08-10-2010, 11:17 AM	#9
2manywheels Drives: 09 YarHB Join Date: Feb 2009 Location: Canada Posts: 175	ddongbap: $24 to ship $36 dollars of center caps... :( OUCH!!

08-11-2010, 09:13 PM	#11
Klink10 View User's Garage Drives: 2007 Yaris Liftback Join Date: Sep 2007 Location: 910 Posts: 1,229	So you can just peel the decal of "Konig" off the cap. Doesn't that leave a flat surface with no need to sand?

08-15-2010, 09:40 PM	#13
Klink10 View User's Garage Drives: 2007 Yaris Liftback Join Date: Sep 2007 Location: 910 Posts: 1,229	2mw..........Have these come yet? Interested in some pics with your lowering idea as well as stock if you feel in a rush. Thanks

08-15-2010, 10:36 PM	#14
2manywheels Drives: 09 YarHB Join Date: Feb 2009 Location: Canada Posts: 175	No, Kyle from Tirerack called me Friday saying that they were hoping to be shipped out of Nevada(friday) So Maybe Wed this week.. I hope!! Not sure if I am going to need a re-alignment with these being a fair bit wider than stock etc. There is a place here in town that has the Konig center caps, but he isn't sure they are the same as we are looking for. Will swing by Monday or Tuesday afterwork to see.. oh.. hehe.. thats tomorrow. Weekend was too freakin short!! Also ordered a sprint booster. I got tired of the stupid slow return on the throttle when "off" the gas.. Grrrrrrr

08-15-2010, 11:10 PM	#15
sleey0 Drives: 2008 Yaris LB Join Date: Jul 2010 Location: PA Posts: 899	My throttle response is pretty touchy, especially for a drive-by-wire system. Mine is a manual, though I am not sure if you have auto or not.

08-15-2010, 11:18 PM	#16
2manywheels Drives: 09 YarHB Join Date: Feb 2009 Location: Canada Posts: 175	I have the manual.. I can be driving along at say.. 50mph.. Push the clutch in.. or take it out of gear.. and it will sit at 3000rpm for 30 or more seconds before it will come down.. if I slow down before going into a corner, it feels like I am trail braking.. which in most cases I am not!