Cruise control install 2009 Yaris 3 door

[CB900F2]

Scott..

Do we assume the conection between D3 and V1 are there?, have you ever checked your Yarris buggy/plow?

I just reced the OEM CC stalk I ordered and pissed that Toyota went to all of the troubole to have the ECU with the CC software installed, and harness fabed with all the interwire connects except D3 to AD4! Man I hate those guys at Toyota!..

P.S...Do we know the terminal specs or the termial size part# if I wanted to add the two connects to D3.. The terminals are very small and I have never seen this type at any local electronic store..

P.P.S.. Scott, have you ever take apart your gauge cluster too see if the electrical traces are there for the CC light indicator in hoping that all is needed is possible a inline resistor and/or SM led

Originally Posted by CTScott

Getting to AD4 requires removing the top of the dash, so if there is a wire in pin 40, I would tap it and run to the steering column.