Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 09-27-2010, 04:53 PM   #1
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
MAN If i knew you were getting a lift I know a guy in Cherry Hill, NJ who sells refurbs for $1200. We got our low clearance Mohawk A7 from him. I dunno about the lift you have, i have never seen or heard of it, but if it works it works and as long as it has locks. I would test it with a heavier vehicle too.

Be careful though with the doors of the garage open. If you didn't get a permit to put that in there sometimes they are sticklers about it and will fine you and make you take it down!. My friend built a 70K 3 floor addition to his house to put a lift and do work, and the zoning guy came by and shot him down hard.

How many bolts is that thing being held on by? is it shimmed at all? Looks a little scary IMHO. Might just be me and the way the pictures are angled.
Nexus1155 is offline   Reply With Quote
Old 09-27-2010, 05:58 PM   #2
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by Nexus1155 View Post
MAN If i knew you were getting a lift I know a guy in Cherry Hill, NJ who sells refurbs for $1200. We got our low clearance Mohawk A7 from him. I dunno about the lift you have, i have never seen or heard of it, but if it works it works and as long as it has locks. I would test it with a heavier vehicle too.

Be careful though with the doors of the garage open. If you didn't get a permit to put that in there sometimes they are sticklers about it and will fine you and make you take it down!. My friend built a 70K 3 floor addition to his house to put a lift and do work, and the zoning guy came by and shot him down hard.

How many bolts is that thing being held on by? is it shimmed at all? Looks a little scary IMHO. Might just be me and the way the pictures are angled.


I looked at some used ones, but couldn't find any to fit in my garage. A buddy of mine bought a used bendpak for $500 and poured a slab outside for it. I like the idea of using mine in my heated garage.

It is extremely solid. No shims were required, as the base plates sat perfectly on the floor. Each post is secured by 5 bolts.

Here's a video of one being installed in Jay Leno's garage:

http://www.jaylenosgarage.com/extras...e-lift-system/
CTScott is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 Yaris lift eric81 Wheels, Tires and Suspension Forum sponsored by The Tire Rack 17 10-13-2015 09:57 AM
hood lift? Qmobile Cosmetic Modifications (Exterior/Interior) 19 08-14-2010 10:35 PM
Finally!!! SkittlePig Australia 11 07-05-2010 08:49 PM
Finally finished the Yaris Riced-yaris Photo-Video-Media Gallery 18 05-17-2009 01:11 AM
WeSellCarParts.com // Redline Tuning Hood Lift! WeSellCarParts WeSellCarParts 45 12-18-2008 08:12 PM


All times are GMT -4. The time now is 12:09 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.