Tighten bolts to factory specs?

[severous01]

80 is fine...as long as you didnt get the 150lb one.

also, if you are using the stick and gun, lightly hit the gun to touch lugs to wheels. then go back a second time and tighten with teh stick/gun combo to prevent the rotor warping issue.

if you seat the wheel firmly first you shouldnt have any problems...but think about what happens when you tighten one side before all the others...it leans that way, then you pull it back the other way with the other 3 lugs...pulling the bearing/hub/rotor with it