Painted Headlights

[catliektheif]

Originally Posted by Stove

I didn't bake/heat the light housings, I was able to work the lights apart and cut the sealant as I went.

how did you seal it back up?

[Stove]

Originally Posted by catliektheif

how did you seal it back up?

High Temp Silicone. I used it sparingly around the joint between the lens and the lower housing after I reassembled them. I wanted to be able to separate the parts easily if I decide later to add some LED's or do something else to dress them up little. If I end up with a little condensation in them, I'll pull them and reseal them.