Headlamp Conversion - Toyota Yaris Forums

SAV912 · 12-30-2011, 03:38 PM

In order to do a retrofit for projectors, you have to remove the plastic shell from the bowl anyway, and there's proof that people have done that. The difference in your case would be getting a 2010 plastic shell with the curve on the inner edge to fit over a 2008 reflector bowl. And without some epoxy and lots of silicone sealant, I don't see that happening.

There really aren't many differences between the two front ends. Unless you're getting the full S treatment, why are you bothering with the 2010 conversion? I'd stick with the 2.0 gen, rather than the 2.1, especially if there are OEM HIDs involved.

-C

12-30-2011, 03:38 PM	#1
SAV912 Pirate Yaaaaris View User's Garage Drives: '00 Toyota Celica GTS 6MT Join Date: Aug 2009 Location: Savannah, GA Posts: 573	In order to do a retrofit for projectors, you have to remove the plastic shell from the bowl anyway, and there's proof that people have done that. The difference in your case would be getting a 2010 plastic shell with the curve on the inner edge to fit over a 2008 reflector bowl. And without some epoxy and lots of silicone sealant, I don't see that happening. There really aren't many differences between the two front ends. Unless you're getting the full S treatment, why are you bothering with the 2010 conversion? I'd stick with the 2.0 gen, rather than the 2.1, especially if there are OEM HIDs involved. -C __________________ Georgia Bulldogs! '09 Yaris LB 5MT Sold.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
One filament in the headlamp bulb.	ellenbetty	General Yaris / Vitz Discussion	7	09-06-2009 02:30 PM
Xenon-Vision HID Conversion Kit - $120 Shipped/$160 Shipped for Slim Ballast	phu@xenon-vision	Sponsors Classifieds Area	8	03-06-2009 03:33 PM
2009 Front Bumper Conversion with foglight	808yarisLB	Cosmetic Modifications (Exterior/Interior)	25	01-03-2009 01:47 AM