Dynaliner - 1/8",1/4" or 1/2"? - Toyota Yaris Forums

Damo · 03-06-2012, 03:42 AM

Hey all.

Im currently in the process of applying Dynamat Extreme to my car and will be following up with dynaliner throughout.

The thicker, the better obviously, but of course there are spots on the car where 1/2" and even 1/4" are going to be too thick for clearance once panels/upholstery is put back into place. I need to get an idea of how much I need to buy of each thickness...

To those who know or have done this - Can you make any recommendations as to maximum thicknesses/allowance for either or all of the below, or put forward any problem areas you encountered?

a) Doors - I'm guessing 1/2" on the outer panel, 1/8" for the inner (speaker) panel?
b) Roof - 1/4" throughout?
c) Trunk - 1/4"?
d) Floor - 1/4"?

Many thanks in advance!

sqcomp · 03-06-2012, 02:11 PM

As one who is using Dynaliner, Ensolite, and Overkill in my vehicle...

I enjoy the performance of the Stinger Overkill hands down over either of the others.

Damo · 03-06-2012, 06:25 PM

Interesting, sq.
I don't know if I can source Stinger stuff easily, but what thickness did you use, and can Overkill go straight over the top of dynamat extreme?

sqcomp · 03-06-2012, 10:23 PM

It actually bonds better than the dynaliner...

And yes, it'll go over the dynamat extreme just fine.

Damo · 03-07-2012, 07:19 AM

Their website is horrible!
Any idea how thick it is?

sqcomp · 03-07-2012, 11:49 AM

You have multiple thicknesses available.

I haven't been on to the site in a while.

03-06-2012, 03:42 AM	#1
Damo Drives: 2011 Yaris 3-Door Hatch white Join Date: Feb 2010 Location: Perth, Western Australia Posts: 79	Dynaliner - 1/8",1/4" or 1/2"? Hey all. Im currently in the process of applying Dynamat Extreme to my car and will be following up with dynaliner throughout. The thicker, the better obviously, but of course there are spots on the car where 1/2" and even 1/4" are going to be too thick for clearance once panels/upholstery is put back into place. I need to get an idea of how much I need to buy of each thickness... To those who know or have done this - Can you make any recommendations as to maximum thicknesses/allowance for either or all of the below, or put forward any problem areas you encountered? a) Doors - I'm guessing 1/2" on the outer panel, 1/8" for the inner (speaker) panel? b) Roof - 1/4" throughout? c) Trunk - 1/4"? d) Floor - 1/4"? Many thanks in advance!

03-06-2012, 02:11 PM	#2
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	As one who is using Dynaliner, Ensolite, and Overkill in my vehicle... I enjoy the performance of the Stinger Overkill hands down over either of the others. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

03-06-2012, 10:23 PM	#4
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	It actually bonds better than the dynaliner... And yes, it'll go over the dynamat extreme just fine. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

03-07-2012, 11:49 AM	#6
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	You have multiple thicknesses available. I haven't been on to the site in a while. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Polk Audio 6 1/2" DB650	cali yaris	Items for Sale by private party	1	06-17-2009 06:21 PM
6 1/2" speakers (middle tennessee area)	bugnuts	In Car Entertainment + Electronics (audio / video / alarm)	0	11-01-2006 10:03 PM

03-06-2012, 06:25 PM	#3
Damo Drives: 2011 Yaris 3-Door Hatch white Join Date: Feb 2010 Location: Perth, Western Australia Posts: 79	Interesting, sq. I don't know if I can source Stinger stuff easily, but what thickness did you use, and can Overkill go straight over the top of dynamat extreme?

03-07-2012, 07:19 AM	#5
Damo Drives: 2011 Yaris 3-Door Hatch white Join Date: Feb 2010 Location: Perth, Western Australia Posts: 79	Their website is horrible! Any idea how thick it is?