tooter's manifold adventure... - Page 24 - Toyota Yaris Forums

malibuguy · 08-02-2012, 10:26 PM

Skeet skeet....

mazilla · 08-02-2012, 11:32 PM

saweeet!

When is the cutoff for the hp/tq estimates?

tooter · 08-03-2012, 12:41 AM

Right up until I post the dyno results. If anyone wants to change their guess, they can. Just copy the list of guesses, and repost your updated guess in this thread.

Just in case anyone wants to rethink their guess, keep in mind that everything on either side of the manifold is exactly the same... same intake... same throttle body... same engine... same exhaust... same ECU.

The differences of the tooter manifold as compared to the stock manifold are:

1. ~5% longer runners

2. ~23% larger diameter runners

3. very small plenum, only ~30% of stock manifold plenum volume

4. intake tube behind the throttle body empties into the exact middle of the plenum

5. all of the entrance ports of the runners are in direct alignment with the axis of the throttle body

Yoda · 08-03-2012, 01:13 AM

malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 +3
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ
Bluevitz-RS +4hp +6Tq
Scubaru Steve 0hp +10Tq
Flipper_1938 +6hp +4 ft lbs
Viperoni +2 -5

enviri · 08-03-2012, 02:44 PM

malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 +3
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ
Bluevitz-RS +4hp +6Tq
Scubaru Steve 0hp +10Tq
Flipper_1938 +6hp +4 ft lbs
Viperoni +2 -5
enviri +0tq +3hp

ljming99 · 08-03-2012, 04:32 AM

Quote:

Originally Posted by tooter

Right up until I post the dyno results. If anyone wants to change their guess, they can. Just copy the list of guesses, and repost your updated guess in this thread.

Just in case anyone wants to rethink their guess, keep in mind that everything on either side of the manifold is exactly the same... same intake... same throttle body... same engine... same exhaust... same ECU.

The differences of the tooter manifold as compared to the stock manifold are:

1. ~5% longer runners

2. ~23% larger diameter runners

3. very small plenum, only ~30% of stock manifold plenum volume

4. intake tube behind the throttle body empties into the exact middle of the plenum

5. all of the entrance ports of the runners are in direct alignment with the axis of the throttle body

Doesnt really matter if it failed in the performance department.

BLING BLING FTW

tooter · 08-03-2012, 11:08 AM

Quote:

Originally Posted by ljming99

Doesnt really matter if it failed in the performance department.

BLING BLING FTW

Performing worse is always a possibility.
But it definitely has +10 +10 bling.

I'm really curious how it will drive at low rpms with a combination of larger longer runners and almost no plenum.

eTiMaGo · 08-03-2012, 12:04 AM

totally tubular, dude!

BEEF · 08-03-2012, 07:54 AM

that looks awesome

(is it on the car yet, lol)

tooter · 08-03-2012, 11:17 AM

Quote:

Originally Posted by BEEF

that looks awesome

(is it on the car yet, lol)

Not yet.

I have a full day of work today and we're entertaining this weekend, so it's not likely to get installed for a few days.

There's a straight silicone coupler arriving today so I can work on adapting the intake to fit in the shorter space. The larger longer manifold pushes the throttle body 2 3/4 inches farther to the right. Gonna be a really tight fit!

cali yaris · 08-03-2012, 11:36 AM

Quote:

If anyone wants to change their guess, they can.

So someone can review all the guesses, educate themselves from that data, and change their guess? Seems hardly fair, but it's your game. I know casinos don't allow it.

tooter · 08-03-2012, 11:59 AM

Quote:

Originally Posted by cali yaris

So someone can review all the guesses, educate themselves from that data, and change their guess? Seems hardly fair,

It would definitely be unfair if some people had an advantage that others did not have, but it's fair when everyone has exactly the same advantage to make their informed guess as good as possible. The measurements are inconclusive and just some rough parameters that infer a variety of results both positive and negative.

Quote:

but it's your game. I know casinos don't allow it.

...then it's good this isn't Vegas.

CTScott · 08-03-2012, 12:00 PM

Here's mine: -2 HP, +4 ft lbs

xnamerxx · 08-03-2012, 12:11 PM

If your only revving to the stock rev limit im guessing -10hp -10tq and bonus if it goes into limp mode.

tooter · 08-03-2012, 12:22 PM

Quote:

Originally Posted by xnamerxx

If your only revving to the stock rev limit im guessing -10hp -10tq and bonus if it goes into limp mode.

-10 -10 it is, name.

The engine is bone stock with no added electronic management so it only goes to the stock rev limit... and takes a really long time to get there!

cali yaris · 08-03-2012, 12:11 PM

I'm saying the guesses themselves are informative; late guessers have a small advantage, and re-guessers have significant advantage in placing their guess to try to win.

Not that any of that matters.

It's an academic discussion only, and all in good fun.

Hint: I'm not changing my guess

eTiMaGo · 08-03-2012, 12:40 PM

Quote:

Originally Posted by cali yaris

I'm saying the guesses themselves are informative; late guessers have a small advantage, and re-guessers have significant advantage in placing their guess to try to win.

Not that any of that matters.

It's an academic discussion only, and all in good fun.

Hint: I'm not changing my guess

Garm seems to be in full-on Rain Man mode? ;)

Bluevitz-rs · 08-03-2012, 12:31 PM

Have you done a volume comparison with water yet?

08-02-2012, 10:26 PM	#1
malibuguy Obsessed with 1.5L Drives: '10 PW Yaris Sedan Join Date: Feb 2011 Location: Westminster, MD Posts: 908	Skeet skeet.... __________________ -Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr

08-02-2012, 11:32 PM	#2
mazilla advocatus diaboli Drives: 07 Yaris hatch Join Date: Mar 2011 Location: San Jacinto California Posts: 1,126	saweeet! When is the cutoff for the hp/tq estimates? __________________ -Type 07 FFL- My odometer 03/11 http://i205.photobucket.com/albums/b...a/2843ed85.jpg

08-03-2012, 12:41 AM	#3
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Right up until I post the dyno results. If anyone wants to change their guess, they can. Just copy the list of guesses, and repost your updated guess in this thread. Just in case anyone wants to rethink their guess, keep in mind that everything on either side of the manifold is exactly the same... same intake... same throttle body... same engine... same exhaust... same ECU. The differences of the tooter manifold as compared to the stock manifold are: 1. ~5% longer runners 2. ~23% larger diameter runners 3. very small plenum, only ~30% of stock manifold plenum volume 4. intake tube behind the throttle body empties into the exact middle of the plenum 5. all of the entrance ports of the runners are in direct alignment with the axis of the throttle body Last edited by tooter; 08-03-2012 at 02:12 AM.

08-03-2012, 12:04 AM	#8
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	totally tubular, dude! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

08-03-2012, 07:54 AM	#9
BEEF View User's Garage Drives: 2008 yaris 3d Join Date: Apr 2011 Location: north carolina Posts: 732	that looks awesome (is it on the car yet, lol) __________________ Be the change you wish to see in the world -Mahatma Gandhi-

08-03-2012, 01:13 AM	#4
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	malibu +4 -6 Tooter +2 -3 Mazilla +1,000 Garm -5 -5 Anomaly +1 -3 Ljming -3 +3 BEEF +3 -2 Goldeenoh +5 -3 Goliath 0 0 tk-421 +4 -3 Yoda +4 +3 Jason -12 -18 packet +5 +3 Maitre +2 +4 Jeff -3HP -10TQ Bluevitz-RS +4hp +6Tq Scubaru Steve 0hp +10Tq Flipper_1938 +6hp +4 ft lbs Viperoni +2 -5

08-03-2012, 02:44 PM	#5
enviri View User's Garage Drives: 2010 Yaris Join Date: Oct 2008 Location: CT Posts: 1,521	malibu +4 -6 Tooter +2 -3 Mazilla +1,000 Garm -5 -5 Anomaly +1 -3 Ljming -3 +3 BEEF +3 -2 Goldeenoh +5 -3 Goliath 0 0 tk-421 +4 -3 Yoda +4 +3 Jason -12 -18 packet +5 +3 Maitre +2 +4 Jeff -3HP -10TQ Bluevitz-RS +4hp +6Tq Scubaru Steve 0hp +10Tq Flipper_1938 +6hp +4 ft lbs Viperoni +2 -5 enviri +0tq +3hp

08-03-2012, 12:00 PM	#13
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Here's mine: -2 HP, +4 ft lbs __________________

08-03-2012, 12:11 PM	#14
xnamerxx 0-60 in slow Drives: light blue liftback Join Date: Aug 2009 Location: so cal Posts: 926	If your only revving to the stock rev limit im guessing -10hp -10tq and bonus if it goes into limp mode.

08-03-2012, 12:11 PM	#16
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I'm saying the guesses themselves are informative; late guessers have a small advantage, and re-guessers have significant advantage in placing their guess to try to win. Not that any of that matters. It's an academic discussion only, and all in good fun. Hint: I'm not changing my guess __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-03-2012, 12:31 PM	#18
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	Have you done a volume comparison with water yet?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
homemade intake manifold	ttr125fan09	Performance Modifications	1	02-17-2012 01:09 AM
Custom Intake Manifold + Direct Port Nitrous	blacksandiegovitz	Performance Modifications	9	04-21-2010 07:05 PM
Turbo Manifold thread	Sabretooth	Forced Induction Forum	78	05-22-2009 06:52 AM
turbo manifold build...	joey1320	Forced Induction Forum	4	06-30-2007 02:26 PM