tooter's manifold adventure... - Page 44 - Toyota Yaris Forums

Bluevitz-rs · 08-28-2012, 07:43 AM

^ did you start your own thread on it yet?

cali yaris · 08-28-2012, 12:37 PM

This was, and is, tooter's thread. Sorry to post up so much in here "off topic".

Here is a new thread for our manifold project:
http://www.yarisworld.com/forums/sho...854#post663854

tooter · 08-28-2012, 07:13 PM

No problem, Garm.

We're on the same side.

cali yaris · 08-29-2012, 10:29 AM

It would be a reverse step (if you can even call it that) if the flange is 1zz and a smaller 1nz throttle is mounted on it, and it's after the the throttle. That's how our test car is set up.

I don't know if that's going to make much of a difference.

CrankyOldMan · 08-29-2012, 01:25 PM

Here's a pic of a 1ZZ TB from the manifold side. If you need/want a different angle or direct measurements, I can scare those up too. I bought one from fleaBay for $50 and ended up sacrificing it to the techno-god "Howzitwerk" to see if it could be disassembled, cleaned, and reassembled. Turns out the answer to that is a resounding NO.

Oh, and the .pdf is a measured drawing that I made of the basic dimensions. If the picture looks like it's mirrored from the drawing, it's because the right half of the drawing is the face of the manifold, not the TB.

tooter · 08-29-2012, 09:21 PM

Quote:

Originally Posted by CrankyOldMan

Here's a pic of a 1ZZ TB from the manifold side. If you need/want a different angle or direct measurements, I can scare those up too. I bought one from fleaBay for $50 and ended up sacrificing it to the techno-god "Howzitwerk" to see if it could be disassembled, cleaned, and reassembled. Turns out the answer to that is a resounding NO.

Oh, and the .pdf is a measured drawing that I made of the basic dimensions. If the picture looks like it's mirrored from the drawing, it's because the right half of the drawing is the face of the manifold, not the TB.

Hey, thanks Cranky!

It looks like a simple straightforward change to make the adaptor 51mm to match the 1zz throttle bore. That will make three possible tooter options:

1NZ 4 bolt 48mm
1ZZ 4 bolt 51mm
1ZZ 3 bolt 51mm

Jeff@MicroImage · 08-29-2012, 05:40 PM

Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.

suckerface · 08-29-2012, 05:58 PM

Quote:

Originally Posted by Jeff@MicroImage

Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.

Just to clarify, they're the -030 parts, correct?

packetrace · 08-29-2012, 06:00 PM

Quote:

Originally Posted by Jeff@MicroImage

Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.

how much do you sell them ?

Jeff@MicroImage · 08-29-2012, 06:05 PM

Quote:

Originally Posted by suckerface

Just to clarify, they're the -030 parts, correct?

Yes

Quote:

Originally Posted by packetrace

how much do you sell them ?

You can't have one.

packetrace · 08-29-2012, 06:08 PM

Quote:

Originally Posted by Jeff@MicroImage

You can't have one.

YGPM...

tooter · 08-29-2012, 09:15 PM

Quote:

Originally Posted by Jeff@MicroImage

Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.

Thanks, Jeff. Cranky's pic did the job. I just wanted to see if the bore was equidistant from the 4 studs so that the adaptor bore diameter can be adjusted accordingly from tapering down to 48mm to straight 51mm.

cali yaris · 08-29-2012, 06:24 PM

He has a dryyyyy sense of humor.... unless he meant it. LOL

Jeff@MicroImage · 08-29-2012, 06:25 PM

Quote:

Originally Posted by packetrace

YGPM...

PM Replied and emailed you also.

Quote:

Originally Posted by cali yaris

He has a dryyyyy sense of humor.... unless he meant it. LOL

I was joking

packetrace · 08-29-2012, 07:39 PM

Quote:

Originally Posted by Jeff@MicroImage

PM Replied and emailed you also.

I was joking

LOLLL

chexmix · 08-30-2012, 01:42 AM

interesting tread.... weird thing is today my coworker was throwing some car parts away.. one of it is 1zz celica intake manifold.. and i was looking at it.. and in my head.. look like it can fit the yaris... i told him hold on to it so i can do more research on it.. so I'm guessing it is possible..

tooter · 08-30-2012, 11:21 AM

Quote:

Originally Posted by chexmix

interesting tread.... weird thing is today my coworker was throwing some car parts away.. one of it is 1zz celica intake manifold.. and i was looking at it.. and in my head.. look like it can fit the yaris... i told him hold on to it so i can do more research on it.. so I'm guessing it is possible..

If it's an old 2000 Celica 1.8 aluminium intake manifold like this...

...a tooter adaptor flange would make it bolt on to a Yaris engine, although I don't know about the clearance or throttle body fitment issues. Can you post a pic of the manifold if it's aluminium? There's not much you could do if it's a plastic one.

Bluevitz-rs · 08-30-2012, 07:25 AM

It won't fit. Its the same as the aluminum one, but plastic.

08-28-2012, 12:37 PM	#2
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	This was, and is, tooter's thread. Sorry to post up so much in here "off topic". Here is a new thread for our manifold project: http://www.yarisworld.com/forums/sho...854#post663854 __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-29-2012, 10:29 AM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	It would be a reverse step (if you can even call it that) if the flange is 1zz and a smaller 1nz throttle is mounted on it, and it's after the the throttle. That's how our test car is set up. I don't know if that's going to make much of a difference. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-29-2012, 05:40 PM	#7
Jeff@MicroImage "Know it all" Drives: Lancia Delta Integrale Join Date: Jan 2012 Location: SFV, CA Posts: 77	Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up. __________________ www.microimageonline.com

08-29-2012, 06:24 PM	#13
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	He has a dryyyyy sense of humor.... unless he meant it. LOL __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
homemade intake manifold	ttr125fan09	Performance Modifications	1	02-17-2012 01:09 AM
Custom Intake Manifold + Direct Port Nitrous	blacksandiegovitz	Performance Modifications	9	04-21-2010 07:05 PM
Turbo Manifold thread	Sabretooth	Forced Induction Forum	78	05-22-2009 06:52 AM
turbo manifold build...	joey1320	Forced Induction Forum	4	06-30-2007 02:26 PM

08-28-2012, 07:43 AM	#1
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	^ did you start your own thread on it yet?

08-28-2012, 07:13 PM	#3
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	No problem, Garm. We're on the same side.

08-30-2012, 01:42 AM	#16
chexmix Drives: scion xb Join Date: May 2010 Location: oahu Posts: 85	interesting tread.... weird thing is today my coworker was throwing some car parts away.. one of it is 1zz celica intake manifold.. and i was looking at it.. and in my head.. look like it can fit the yaris... i told him hold on to it so i can do more research on it.. so I'm guessing it is possible..

08-30-2012, 07:25 AM	#18
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	It won't fit. Its the same as the aluminum one, but plastic.