Blitz install questions

[47_MasoN_47]

Hmm, mine wouldn't fit that way. There wasn't enough length on the bolt for it to go through the bracket, flange, and L shaped bracket. I ended up using a spare flange on the compressor, bolted the bracket to that with some stuff I had lying around, then zip tied the dipstick to the bracket.

I'm now at this point where I believe I just need a longer hose to get the hose you can see in the top of the image onto the nipple at the bottom. I saw where you mentioned needing a piece of hose, so I'm guessing this is where.



This is what it currently looks like. I've noticed my top compressor tube thing has a kinda ugly weld seam that most people don't seem to have.

[WeeYari]

Originally Posted by 47_MasoN_47

This is what it currently looks like. I've noticed my top compressor tube thing has a kinda ugly weld seam that most people don't seem to have.

Every one I've seen has that weld. Some people have custom finished that piece and have ground the weld down. Maybe that is what you are visualizing.

http://www.yarisworld.com/forums/sho...9&postcount=40

Here is a link to another install where you can see the weld is as pronounced as yours.

http://www.yarisworld.com/forums/sho...5&postcount=79