ok seriously need help... - Toyota Yaris Forums

caineroad · 10-29-2012, 05:46 PM

I checked the seat heater connections (only two red and 1 black)

they look like new, not touching any bare metals.

But I realized the seat heater ground(black) is in the same chassis bolt as the reverse camera ground, does that going to cause a short?

The reverse camera power cables (+/-) and signal cable, with extensions, they all look fine... no burnt, or touching the chassis.

I want to unplug everything from the reverse camera and see if my gauge fuse still blows. But fuses are here are not cheap, is there anyway I can use a multimeter to test, instead of putting a new fuse in?

10-29-2012, 05:46 PM	#22
caineroad Drives: 06 Yaris HB CE Join Date: Aug 2009 Location: Toronto Posts: 501	I checked the seat heater connections (only two red and 1 black) they look like new, not touching any bare metals. But I realized the seat heater ground(black) is in the same chassis bolt as the reverse camera ground, does that going to cause a short? The reverse camera power cables (+/-) and signal cable, with extensions, they all look fine... no burnt, or touching the chassis. I want to unplug everything from the reverse camera and see if my gauge fuse still blows. But fuses are here are not cheap, is there anyway I can use a multimeter to test, instead of putting a new fuse in?