can it be this easy to make a "custom" turbo kit?

[yaris2010RS]

It concerns me that this turbo doesnt have a coolant line (only says oil cooled)

IMO this would be a good kit to build off of. would recommend a better turbo as well and you will probably will need more I/C lines as well as i would be hesitant to use the no-name BOV and wastegate actuator

[Golddeenoh]

Originally Posted by yaris2010RS

It concerns me that this turbo doesnt have a coolant line (only says oil cooled)

IMO this would be a good kit to build off of. would recommend a better turbo as well and you will probably will need more I/C lines as well as i would be hesitant to use the no-name BOV and wastegate actuator

good call, i did notice a higher AR t3/t4 so as long as the mounting flange is the same it should be a fairly easy starting point. there are few more parts to add to what is here with the end goal being a planed build that is cheaper yet more powerfull than a basic 7-8psi kit with an upgraded bottom end.

[fnkngrv]

Originally Posted by yaris2010RS

as well as i would be hesitant to use the no-name BOV and wastegate actuator

+1000

A Tial Wastegate for example is 200+ bucks all on its own let alone and then a solid BOV is another 200+. And let's not forget the boost controller they have which as well you have no idea who manufactures. Just stay away from it and don't have any regrets.