Quote:
Originally Posted by esse10
thanks guys this helps me out.  The only reason i'm changing it out is because some BONE HEAD previous owner of this yaris over-tightened the oil plug. Good thing it's not too expensive online.
@ctscott; 80 inch pounds(6.6 foot pounds) seem pretty low to me, is that from the repair service manual? is that for the gasket setup or just the sealant version of install?
preciate your time folks
julian |
That's from the service manual, so that is for using the Toyota gasket sealant. It should actually be the same for using a real gasket, as the torque is based on the size and material of the fastener and the material it is going into.
03-28-2013, 02:06 PM
Similar Threads
Threaded Mode