NST (NonStopTuning) Pulleys. Info, Specs, User Data... - Page 21 - Toyota Yaris Forums

bikegerm · 04-03-2009, 01:30 PM

Mine just arrived today!! A complete Red Power Pulley Underdrive set for my liftback. Problem is, they're lonely. They are here but the Yaris is with my wife visiting her family 350 miles away. So close, yet so far... I'll let you know when they find each other and how their relationship develops.

NonStopTuning · 04-03-2009, 02:58 PM

Quote:

Originally Posted by bikegerm

Mine just arrived today!! A complete Red Power Pulley Underdrive set for my liftback. Problem is, they're lonely. They are here but the Yaris is with my wife visiting her family 350 miles away. So close, yet so far... I'll let you know when they find each other and how their relationship develops.

AWESOME

NonStopTuning · 04-03-2009, 03:01 PM

Quote:

Originally Posted by wsladaritz

So I was looking on the NST site and there are three different kits for the yaris. Two of them are sold out though. Which kit should I be looking at? Which would be most beneficial for a daily driver just looking to add a little more pep?

You can read through the many pages of this thread, as your questions have been answered many times, in much detail.

Short version...

If you plan to stay naturally aspirated you should use
NST09010 plus NST09025K

If you plan to go supercharged you should use
NST09158 plus NST09025K

We are currently sold out of our crank pulleys (till May 2009), but you should be able to order these pieces from MicroImageOnline.com

Good luck and have fun with all your projects

hatchbackkid82 · 04-03-2009, 03:24 PM

Sorry to be a NOOB, looking to buy a pulley kit what's the difference between the 10% Underdrive kit and the CR-lite pulley kit?

NonStopTuning · 04-05-2009, 05:31 AM

Quote:

Originally Posted by hatchbackkid82

Sorry to be a NOOB, looking to buy a pulley kit what's the difference between the 10% Underdrive kit and the CR-lite pulley kit?

You can read through the many pages of this thread, as your questions have been answered many times, in much detail.

Short version...

If you plan to stay naturally aspirated you should use
NST09010 plus NST09025K

If you plan to go supercharged you should use
NST09158 plus NST09025K

We are currently sold out of our crank pulleys (till May 2009), but you should be able to order these pieces from MicroImageOnline.com

Good luck and have fun with all your projects

thebarber · 04-04-2009, 04:56 PM

i dont feel like reading the whole thread, but i put on my underdrive pulley yesterday and had to buy a new belt that was 355mm long vs the stock 360mm....

belt was too long otherwise...wouldnt get tension in it..

mine is a 3dr w/o air conditioning...

might be worth noting...

auxmike · 04-04-2009, 04:58 PM

No A/C? I thought it came standard?

thebarber · 04-08-2009, 12:12 AM

Quote:

Originally Posted by thebarber

i dont feel like reading the whole thread, but i put on my underdrive pulley yesterday and had to buy a new belt that was 355mm long vs the stock 360mm....

belt was too long otherwise...wouldnt get tension in it..

mine is a 3dr w/o air conditioning...

might be worth noting...

any comment from NST?

NonStopTuning · 04-08-2009, 02:48 AM

Quote:

Originally Posted by thebarber

any comment from NST?

I'm not quite sure what type of comment would be warranted here.

Unfortunately we have never tested with any Yaris that did not have a/c. And as far as I can tell, you are our first ever customer to use one of these pulleys on a Yaris that has no a/c.

Based on past experiences with other cars I can see how you may need a slightly shorter belt with your setup and it sounds like you have found your solution.

Buying a new belt is a small price to pay in exchange for picking up a few extra ponies

Any other owners out there running around with no a/c, please feel free to comment.

thebarber · 04-08-2009, 11:38 AM

Quote:

Originally Posted by NonStopTuning

I'm not quite sure what type of comment would be warranted here.

Unfortunately we have never tested with any Yaris that did not have a/c. And as far as I can tell, you are our first ever customer to use one of these pulleys on a Yaris that has no a/c.

Based on past experiences with other cars I can see how you may need a slightly shorter belt with your setup and it sounds like you have found your solution.

Buying a new belt is a small price to pay in exchange for picking up a few extra ponies

Any other owners out there running around with no a/c, please feel free to comment.

i was just hoping it could be noted somewhere that a new belt is req'd if you don't have a/c

i realize it wont come up too often, but itll save a lot of running around for someone doing the next install

AznGouki · 04-12-2009, 03:35 PM

Quote:

Originally Posted by thebarber

i was just hoping it could be noted somewhere that a new belt is req'd if you don't have a/c

i realize it wont come up too often, but itll save a lot of running around for someone doing the next install

You're not alone. I'm planning on getting the pullies soon and I don't have AC. I'm glad I popped over to this thread first.

d1nzfe · 04-28-2009, 08:02 AM

Quote:

Originally Posted by NonStopTuning

I'm not quite sure what type of comment would be warranted here.

Unfortunately we have never tested with any Yaris that did not have a/c. And as far as I can tell, you are our first ever customer to use one of these pulleys on a Yaris that has no a/c.

Based on past experiences with other cars I can see how you may need a slightly shorter belt with your setup and it sounds like you have found your solution.

Buying a new belt is a small price to pay in exchange for picking up a few extra ponies

Any other owners out there running around with no a/c, please feel free to comment.

Please check your PM.

severous01 · 05-01-2009, 02:37 PM

hey, i was thinkin about underdriving but it's seriously not suggested for my camaro as a daily driver. i was wondering what you would say as a economical standpoint on the underdrive. i'm worried about longevity over power...i have a 500hp camaro for power...

any way, i'm going with the alt and wp pullies as well, but dont know about underdriving.

any way, PM or reply here pls.

wsladaritz · 04-05-2009, 09:22 AM

Hey thx for the info!

YarisSedan · 04-05-2009, 12:32 PM

Thanks to garm at microimage and of course to NST hopefully will have pics of them installed tomorrow. The quality of these look superb

YarisSedan · 04-05-2009, 01:16 PM

BTW does anyone happen to have the torque specs for the bolt for the altenator pulley.

RogueYaris · 04-07-2009, 02:43 AM

I sent NST a pm about 9 days ago and haven't received a response yet. Either way, I was wondering about how long it would take a dealership to install one of these?

ruimond · 04-07-2009, 02:51 AM

Quote:

Originally Posted by RogueYaris

I sent NST a pm about 9 days ago and haven't received a response yet. Either way, I was wondering about how long it would take a dealership to install one of these?

My mechanic installed my underdrive pulley for me, took him about 45mins-1hour. Wasn't very long.

04-03-2009, 01:30 PM	#1
bikegerm View User's Garage Drives: 2007 Meteor LB Join Date: Oct 2008 Location: Nashville, TN. Posts: 229	As The Pulley Turns..... Mine just arrived today!! A complete Red Power Pulley Underdrive set for my liftback. Problem is, they're lonely. They are here but the Yaris is with my wife visiting her family 350 miles away. So close, yet so far... I'll let you know when they find each other and how their relationship develops. __________________ Randy LeRoy www.airshowmastering.com randy@airshowmastering.com

04-04-2009, 04:56 PM	#6
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	i dont feel like reading the whole thread, but i put on my underdrive pulley yesterday and had to buy a new belt that was 355mm long vs the stock 360mm.... belt was too long otherwise...wouldnt get tension in it.. mine is a 3dr w/o air conditioning... might be worth noting... __________________

04-04-2009, 04:58 PM	#7
auxmike Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008 Location: LI, New Yawk Posts: 2,063	No A/C? I thought it came standard? __________________ Never take eyes off opponent - Bruce Lee

05-01-2009, 02:37 PM	#13
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	tried to PM, but u gotta delete some first so... hey, i was thinkin about underdriving but it's seriously not suggested for my camaro as a daily driver. i was wondering what you would say as a economical standpoint on the underdrive. i'm worried about longevity over power...i have a 500hp camaro for power... any way, i'm going with the alt and wp pullies as well, but dont know about underdriving. any way, PM or reply here pls.

04-03-2009, 03:24 PM	#4
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	Sorry to be a NOOB, looking to buy a pulley kit what's the difference between the 10% Underdrive kit and the CR-lite pulley kit?

04-05-2009, 09:22 AM	#14
wsladaritz Y4R1Z View User's Garage Drives: Yaris LB Join Date: Jul 2007 Location: Benton, AR Posts: 219	Hey thx for the info!

04-05-2009, 12:32 PM	#15
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Thanks to garm at microimage and of course to NST hopefully will have pics of them installed tomorrow. The quality of these look superb

04-05-2009, 01:16 PM	#16
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	BTW does anyone happen to have the torque specs for the bolt for the altenator pulley.

04-07-2009, 02:43 AM	#17
RogueYaris View User's Garage Drives: 2015 Abs Red Join Date: Nov 2006 Location: JAX Posts: 374	I sent NST a pm about 9 days ago and haven't received a response yet. Either way, I was wondering about how long it would take a dealership to install one of these?