Installing AMP 2010 yaris HB - Toyota Yaris Forums

Aineal · 12-13-2013, 03:27 PM

I was planning to get this bass package from crutchfield

http://www.crutchfield.com/p_236MB21....html?tp=61893

i just need suggestions on where to put the amp. should i just screw it on the subwoofer box?

thank you

UberSilver · 12-14-2013, 01:22 AM

There's a lot of room under the passenger seat. I installed my 21" long 4 channel amp under there. If you install it on the box, you'll need to run some pretty large gauge wire all the way back from the battery. Under the set would be a much shorter run, and you could use smaller gauge wire.

Aineal · 12-14-2013, 03:00 PM

ok thank you so much for the replies! its going to be my first time doing this so crossing fingers lol

is it hard to remove the passenger seat? after i remove it do i just screw the amp on the floor or do i need to do something else ?

WeeYari · 12-14-2013, 04:33 PM

Quote:

Originally Posted by Aineal

is it hard to remove the passenger seat?

4 E10 torx head bolts. Slide seat forward to reveal 2 in the rear of sliders, slide seat back to reveal 2 in the front of sliders.

Aineal · 12-14-2013, 05:24 PM

I dont have that much tools on where i am now , i was just thinking on mounting the amp on a plywood and hiding it securely under where the spare tire is :/

Aineal · 12-14-2013, 06:13 PM

Thank you so much ill post update once i have everything :)

sqcomp · 12-14-2013, 11:26 PM

Keep the ground as short as possible. Remember to fuse the amp within 18" of the battery as well.

Also, before you turn on the amplifier turn the gain all the way down...just in case you have any Voltage spikes when turning it on. Take a look at the options for the amplifier's crossover section to make sure you've dialed everything as well as possible before you turn it on.

nookandcrannycar · 12-15-2013, 12:13 AM

Quote:

Originally Posted by UberSilver

There's a lot of room under the passenger seat. I installed my 21" long 4 channel amp under there. If you install it on the box, you'll need to run some pretty large gauge wire all the way back from the battery. Under the set would be a much shorter run, and you could use smaller gauge wire.

How did you solve the floor issue that TOLMACH mentions in post #6 ?

nookandcrannycar · 12-15-2013, 08:40 PM

^ Thanks

.

Aineal · 12-15-2013, 09:21 PM

Quote:

Originally Posted by sqcomp

Keep the ground as short as possible. Remember to fuse the amp within 18" of the battery as well.

Also, before you turn on the amplifier turn the gain all the way down...just in case you have any Voltage spikes when turning it on. Take a look at the options for the amplifier's crossover section to make sure you've dialed everything as well as possible before you turn it on.

thanks for the tip!

can someone give a link for a good amp kit on ebay or anywhere

for this bass package : http://www.crutchfield.com/S-FNtFp7r....html?tp=61893

Aineal · 12-16-2013, 07:30 PM

Quote:

Originally Posted by TOLMACH

http://www.ebay.com/itm/23-OVERSIZE-...item4d0df2b7cc

I like that they say their gauge 4 is real gauge 4 (25 mm2)

Cheaper stuff will also do the job
http://www.ebay.com/itm/4-Gauge-Amp-...item19e59d8f2c

thanks

sqcomp · 12-19-2013, 12:05 PM

Aineal here in VA are you? I ask because there's a SLIM chance that I can meet with you to discuss the proper way to install an amplifier.

The planets have to align, seeing as I'm in the Bahamas now, flying back into Dulles on Saturday and then flying out to Portland on Sunday...

Honestly, What you need requires a trip to a sound shop and their permission to root through the used wire box (which I'm pretty sure every shop has) and a root through their scrap MDF.

You don't need to buy a thing online. IT's just a smile, a handshake and a few minutes of jaw jacking.

Since my Yaris is back home on the west coast, I'd show you what I did in my wife's truck for her system. Everything I used for peripherals in her truck was from the scrap bins from my local shop.

Aineal · 12-26-2013, 11:22 PM

Hey sqcomp im from cville! I just got everything wired up yesterday and eveything is working well :) i will post pics when i get a chance tomorrow, it took me 5 hours to do everything , but i found the hole in the firewall really fast and installation was a success

UberSilver · 12-27-2013, 03:20 PM

Quote:

Originally Posted by nookandcrannycar

How did you solve the floor issue that TOLMACH mentions in post #6 ?

I cut a piece of 3/4 ply, to 20"x10". Bolted that to the floor, then used wood screws to hold down the amp.

nookandcrannycar · 12-27-2013, 05:35 PM

Quote:

Originally Posted by UberSilver

I cut a piece of 3/4 ply, to 20"x10". Bolted that to the floor, then used wood screws to hold down the amp.

Thanks

.

12-13-2013, 03:27 PM	#1
Aineal Drives: Toyota Hatchback Yaris 2010 Join Date: Aug 2013 Location: Virginia Posts: 12	Installing AMP 2010 yaris HB I was planning to get this bass package from crutchfield http://www.crutchfield.com/p_236MB21....html?tp=61893 i just need suggestions on where to put the amp. should i just screw it on the subwoofer box? thank you

12-14-2013, 01:22 AM	#2
UberSilver Drives: 08Yaris2D, 88LandCruiser. Join Date: Jan 2013 Location: Alameda,Ca. Posts: 476	There's a lot of room under the passenger seat. I installed my 21" long 4 channel amp under there. If you install it on the box, you'll need to run some pretty large gauge wire all the way back from the battery. Under the set would be a much shorter run, and you could use smaller gauge wire. __________________ Give a man a fish, and he'll eat for a day. Sell a man a fish, and you'll both eat for a day.

12-14-2013, 11:26 PM	#7
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Keep the ground as short as possible. Remember to fuse the amp within 18" of the battery as well. Also, before you turn on the amplifier turn the gain all the way down...just in case you have any Voltage spikes when turning it on. Take a look at the options for the amplifier's crossover section to make sure you've dialed everything as well as possible before you turn it on. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

12-19-2013, 12:05 PM	#12
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Aineal here in VA are you? I ask because there's a SLIM chance that I can meet with you to discuss the proper way to install an amplifier. The planets have to align, seeing as I'm in the Bahamas now, flying back into Dulles on Saturday and then flying out to Portland on Sunday... Honestly, What you need requires a trip to a sound shop and their permission to root through the used wire box (which I'm pretty sure every shop has) and a root through their scrap MDF. You don't need to buy a thing online. IT's just a smile, a handshake and a few minutes of jaw jacking. Since my Yaris is back home on the west coast, I'd show you what I did in my wife's truck for her system. Everything I used for peripherals in her truck was from the scrap bins from my local shop. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2010 Yaris Stereo Install Help	FPG	In Car Entertainment + Electronics (audio / video / alarm)	13	04-21-2012 09:16 PM
CONSUMER REPORTS : March issue : 2010 YARIS sedan	Hershey	General Yaris / Vitz Discussion	41	02-18-2011 03:41 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM

12-14-2013, 03:00 PM	#3
Aineal Drives: Toyota Hatchback Yaris 2010 Join Date: Aug 2013 Location: Virginia Posts: 12	ok thank you so much for the replies! its going to be my first time doing this so crossing fingers lol is it hard to remove the passenger seat? after i remove it do i just screw the amp on the floor or do i need to do something else ?

12-14-2013, 05:24 PM	#5
Aineal Drives: Toyota Hatchback Yaris 2010 Join Date: Aug 2013 Location: Virginia Posts: 12	I dont have that much tools on where i am now , i was just thinking on mounting the amp on a plywood and hiding it securely under where the spare tire is :/

12-14-2013, 06:13 PM	#6
Aineal Drives: Toyota Hatchback Yaris 2010 Join Date: Aug 2013 Location: Virginia Posts: 12	Thank you so much ill post update once i have everything :)

12-15-2013, 08:40 PM	#9
nookandcrannycar Drives: 2('14+'07)MT 3d ,wHandCrWndws! Join Date: May 2009 Location: S.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles Posts: 4,839	^ Thanks .

12-26-2013, 11:22 PM	#13
Aineal Drives: Toyota Hatchback Yaris 2010 Join Date: Aug 2013 Location: Virginia Posts: 12	Hey sqcomp im from cville! I just got everything wired up yesterday and eveything is working well :) i will post pics when i get a chance tomorrow, it took me 5 hours to do everything , but i found the hole in the firewall really fast and installation was a success