 |
 |
|
|
|
|
01-04-2014, 01:35 AM
|
#1 |
  
Drives: 2005 Toyota Vitz RS Join Date: Jan 2012
Location: Auckland, New Zealand
Posts: 181
|
Problem solved !
Thank goodness it was quite a simple fix.
Turns out the pin on the junction box at the kick panel was pushed in somehow so it was not making contact. I pulled the pin out and plugged everything back in and it worked !!!  Phew. I am glad that was an easy fix. I did not want to have to pull out all the wiring. On an interesting note, in my other post where I ask help to identify some aftermarket looking wiring is in fact the wiring for these LED turn signal. Funny that ! Thanks for the guidance. I've put a picture of the pushed in pin |
|
|
 |
| Tags |
| turn signals, wiring |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Free Projectors or LED tails for 1 Yaris 4d + 1 Yaris 2d in SoCal | V70R_Blackbrick | Cosmetic Modifications (Exterior/Interior) | 26 | 11-27-2013 11:14 PM |
| Yari gets a sway bar and a rim change (again) | D&D | Photo-Video-Media Gallery | 8 | 09-16-2013 02:10 AM |
| DIY: $0 fix for LED hyper-blinkin' turn signal flasher | Mittelklasse | DIY / Maintenance / Service | 0 | 06-28-2013 06:15 PM |
| LED TURN SIGNAL PROBLEMS | joeljcruz86 | DIY / Maintenance / Service | 11 | 10-15-2011 02:14 PM |
Hybrid Mode
