beams 3sge fs - Toyota Yaris Forums

exileddeus · 06-07-2014, 10:05 PM

[IMG]

[/IMG]

[[IMG]

[/IMG]

Hey all, figured I would post this here too. One of you all may be interested in this. I have a 5th generation BEAMS 3S-GE blacktop for sale. This one was bought about 3years ago for a project AE86 that didn't pan out. It is a low mileage motor, and it shows. The bottom end looks good, as does the valve train and clutch. It has a new water pump and oil pump on it from a 5S camry. This allows the motor to run a smaller camry oil pan which is a little more swapfriendly than the OE hammer head pan. Both a moddified camry pan and the OE pan will be included. The OE pan needs some love( it was cut for notching, just needs to be weilded back). This motor will need an ecu, wiring harness, timing belt and alternator. All the OE parts I have are in good shape and included as well. RWD 6- speed manual trans is included as well.

Anyway, sorry for the poor quality of pics, feel free to ask any questions about the motor if interested. NOT wanting to ship this as it would have to be freight and complicated. Located near atlanta. Asking $1000

B2FiNiTY · 06-07-2014, 11:59 PM

too cool

1.5 · 06-08-2014, 09:37 AM

Put it in the yaris now

exileddeus · 06-08-2014, 12:35 PM

Lol that would be a lot of work......if it even fits. Definitely wouldn't pass emissions :/ still though 205na hp on hand would be nice.

1.5 · 06-09-2014, 06:56 AM

lol because racecar

G-Ammo · 06-09-2014, 03:54 PM

My brother has one of these in his MR2 import :D those engines are SICK...!! Going to buy a MR2 too when I can afford it.. probably a Beams too :)

Brett! · 06-09-2014, 04:24 PM

what is a good application for this engine (aside from ae86/camry/mr2) - would it be a fun engine for a geo metro or yaris? :D

exileddeus · 06-09-2014, 04:38 PM

Well, technically this is a rwd motor (from an altezza rs200) but the fwd trans from the mr2/ camry should bolt up. Its a tall motor, idk if it would fit into a yaris engine bay. Axles would probably the hardest part outside of fitment

Brett! · 06-09-2014, 06:23 PM

Quote:

Originally Posted by exileddeus

Well, technically this is a rwd motor (from an altezza rs200) but the fwd trans from the mr2/ camry should bolt up. Its a tall motor, idk if it would fit into a yaris engine bay. Axles would probably the hardest part outside of fitment

would I be a cool guy if I put it in an old single cab toyota tacoma 2wd and lowered it down a little?

cali yaris · 06-09-2014, 06:23 PM

Got compression numbers?

exileddeus · 06-09-2014, 06:57 PM

Stock I think it's 11.5:1 I haven't tested it since the day I bought it though.

exileddeus · 06-09-2014, 07:00 PM

@Brett! That would be pretty cool, especially if you bagged it!

06-07-2014, 10:05 PM	#1
exileddeus Drives: '10 Yaris HB Join Date: Dec 2010 Location: Austell, GA Posts: 23	beams 3sge fs [IMG][/IMG] [[IMG][/IMG] Hey all, figured I would post this here too. One of you all may be interested in this. I have a 5th generation BEAMS 3S-GE blacktop for sale. This one was bought about 3years ago for a project AE86 that didn't pan out. It is a low mileage motor, and it shows. The bottom end looks good, as does the valve train and clutch. It has a new water pump and oil pump on it from a 5S camry. This allows the motor to run a smaller camry oil pan which is a little more swapfriendly than the OE hammer head pan. Both a moddified camry pan and the OE pan will be included. The OE pan needs some love( it was cut for notching, just needs to be weilded back). This motor will need an ecu, wiring harness, timing belt and alternator. All the OE parts I have are in good shape and included as well. RWD 6- speed manual trans is included as well. Anyway, sorry for the poor quality of pics, feel free to ask any questions about the motor if interested. NOT wanting to ship this as it would have to be freight and complicated. Located near atlanta. Asking $1000

06-08-2014, 09:37 AM	#3
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Put it in the yaris now __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

06-09-2014, 06:56 AM	#5
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	lol because racecar __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

06-09-2014, 03:54 PM	#6
G-Ammo Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010 Location: The Netherlands Posts: 495	My brother has one of these in his MR2 import :D those engines are SICK...!! Going to buy a MR2 too when I can afford it.. probably a Beams too :) __________________ Speedbumps suck...!

06-09-2014, 06:23 PM	#10
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Got compression numbers? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-07-2014, 11:59 PM	#2
B2FiNiTY Drives: Prius C Join Date: Feb 2013 Location: US Posts: 240	too cool

06-08-2014, 12:35 PM	#4
exileddeus Drives: '10 Yaris HB Join Date: Dec 2010 Location: Austell, GA Posts: 23	Lol that would be a lot of work......if it even fits. Definitely wouldn't pass emissions :/ still though 205na hp on hand would be nice.

06-09-2014, 04:24 PM	#7
Brett! View User's Garage Drives: 2010 3D base Join Date: Dec 2013 Location: Houston, TX Posts: 31	what is a good application for this engine (aside from ae86/camry/mr2) - would it be a fun engine for a geo metro or yaris? :D

06-09-2014, 04:38 PM	#8
exileddeus Drives: '10 Yaris HB Join Date: Dec 2010 Location: Austell, GA Posts: 23	Well, technically this is a rwd motor (from an altezza rs200) but the fwd trans from the mr2/ camry should bolt up. Its a tall motor, idk if it would fit into a yaris engine bay. Axles would probably the hardest part outside of fitment

06-09-2014, 06:57 PM	#11
exileddeus Drives: '10 Yaris HB Join Date: Dec 2010 Location: Austell, GA Posts: 23	Stock I think it's 11.5:1 I haven't tested it since the day I bought it though.

06-09-2014, 07:00 PM	#12
exileddeus Drives: '10 Yaris HB Join Date: Dec 2010 Location: Austell, GA Posts: 23	@Brett! That would be pretty cool, especially if you bagged it!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Low beams & High beams on together?	Deathegg	DIY / Maintenance / Service	26	12-22-2018 10:19 PM
Low Beams not working	Karri'es Yaris	DIY / Maintenance / Service	7	02-10-2012 08:34 PM
Bi-Xenon High Beams Not working	YAR1S	DIY / Maintenance / Service	14	12-24-2010 02:21 PM
Problem with low beams and High Beams	thebarbrr	DIY / Maintenance / Service	7	09-22-2010 08:43 AM
Fog lamps as back up low beams.	ellenbetty	General Yaris / Vitz Discussion	114	10-22-2009 03:40 PM