 |
 |
|
|
|
|
08-23-2014, 08:28 AM
|
#1 |
|
Obsessed with 1.5L
Drives: '10 PW Yaris Sedan Join Date: Feb 2011
Location: Westminster, MD
Posts: 908
|
Your maf housing is the incorrect diameter. If its any different then stock the readings are skewed.
At least on our 1.5s the maf housing is 60mm-2 3/8" Yours is probably the same. Larger will run lean...smaller will run rich
__________________
-Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr |
|
|
|
08-23-2014, 06:39 PM
|
#2 | |
  Drives: 06' Yaris 1.3l Join Date: Jul 2014
Location: NZ
Posts: 46
|
Quote:
But what I don't get is doesn't the ECU adapt to the difference in air flow etc over time.. (I have a fried also with 3" setup. ) Also, why does the engine shut off? AFAIK it should go into "Limp" mode.. |
|
|
|
|
 |
|
|
Hybrid Mode
