Lowest springs - Page 2 - Toyota Yaris Forums

Exiwolfman · 08-24-2014, 08:49 PM

One can only go so low when u have winter to drive in ...never heard of "sprint ' springs also all depending on ur wheel combo to make gap go away look lol
I would say my teins have not fully settle but drop so far is around 2inch

sent from my S4 on Mars

*Astroman* · 08-24-2014, 08:55 PM

Lol I hear you there! I have to stop driving the Yaris when the snow on the road freezes or those nice ice chunks that fall off of trucks get on the road, however driving through powder is quite fun, the front bumper lip pushes it like a plow. The TEINs are great springs (I have a set in the garage) but preferred the sprints.

Exiwolfman · 08-24-2014, 08:58 PM

I find the tein little on the soft side after using sportline but over all much better ride as a DD

Apex 1.4/1.4
Eibach Pro 1.0/1.0
Arospeed 1.6/1.6
Tanabe DF210 1.8/2.0
Tanabe NF210 1.5/1.5
Tein S-tech 1.9/1.9
Sprint 1.75/1.75
TRD .5/1.5

sent from my S4 on Mars

JL512 · 09-18-2014, 02:38 PM

I've installed a handful of rotors on light duty race cars and regular cars over the years, ranging from hi-performance slotted to cheapo budget no-name rotors. I'm no pro mechanic, just an avid auto-crosser and DIY'er, but I think these are the best bang for the buck. If anything, avoid the no-name stuff or serious budget stuff. They rust like crazy, and do not have a consistent enough run-out which may lead to brake judder. These come from a respected company and for their LUK Schaffer for long lasting corrosion protection Black XD Brake kit paired with kevlar or carbon brake pads is definitely the way to go for your

yarisugi · 09-18-2014, 04:08 PM

@JL512 - why are you posting your brake and rotor stuff on a "spring" thread? You've done the same thing on two other "spring" threads as well.

Exiwolfman · 09-18-2014, 04:11 PM

Quote:

Originally Posted by yarisugi

@JL512 - why are you posting your brake and rotor stuff on a "spring" thread? You've done the same thing on two other "spring" threads as well.

What he said ^

sent from my S4 on Mars

MyzticZ3r0 · 09-18-2014, 04:14 PM

Quote:

Originally Posted by Astroman

The TEIN sit higher than the sprint springs, you actually have wheel gap there. Sprint settled 2", more than the TEIN and the OP was asking about the lowest springs.

I love that paint job your cousin did...

WeeYari · 09-18-2014, 04:14 PM

Quote:

Originally Posted by yarisugi

@JL512 - why are you posting your brake and rotor stuff on a "spring" thread? You've done the same thing on two other "spring" threads as well.

because lukschaffer.com

08-24-2014, 08:55 PM	#20
Astroman Modded Moderator View User's Garage Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007 Location: Wenatchee, WA Posts: 3,670	Lol I hear you there! I have to stop driving the Yaris when the snow on the road freezes or those nice ice chunks that fall off of trucks get on the road, however driving through powder is quite fun, the front bumper lip pushes it like a plow. The TEINs are great springs (I have a set in the garage) but preferred the sprints. __________________ Please visit my online store for computer stuff and Official Yarisworld decals!

09-18-2014, 02:38 PM	#22
JL512 Drives: Toyota Yaris Join Date: Sep 2014 Location: Clifornia - United States Posts: 6	I've installed a handful of rotors on light duty race cars and regular cars over the years, ranging from hi-performance slotted to cheapo budget no-name rotors. I'm no pro mechanic, just an avid auto-crosser and DIY'er, but I think these are the best bang for the buck. If anything, avoid the no-name stuff or serious budget stuff. They rust like crazy, and do not have a consistent enough run-out which may lead to brake judder. These come from a respected company and for their LUK Schaffer for long lasting corrosion protection Black XD Brake kit paired with kevlar or carbon brake pads is definitely the way to go for your __________________ LUK Schaffer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tein S-tech Springs with Stock shocks combination.	daddz07	California	11	08-21-2010 02:49 PM
Another rear spring option! Honda Fit springs!!	kngrsll	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	29	10-23-2009 06:02 PM
Lowest drop available with springs	hatchbackkid82	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	7	12-14-2008 04:09 PM
Lowest Drop On Springs?	Kaeon	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	33	08-20-2007 05:15 PM

08-24-2014, 08:49 PM	#19
Exiwolfman View User's Garage Drives: 2007 Yaris Join Date: Feb 2013 Location: Wasaga beach Posts: 1,617	One can only go so low when u have winter to drive in ...never heard of "sprint ' springs also all depending on ur wheel combo to make gap go away look lol I would say my teins have not fully settle but drop so far is around 2inch sent from my S4 on Mars

08-24-2014, 08:58 PM	#21
Exiwolfman View User's Garage Drives: 2007 Yaris Join Date: Feb 2013 Location: Wasaga beach Posts: 1,617	I find the tein little on the soft side after using sportline but over all much better ride as a DD Apex 1.4/1.4 Eibach Pro 1.0/1.0 Arospeed 1.6/1.6 Tanabe DF210 1.8/2.0 Tanabe NF210 1.5/1.5 Tein S-tech 1.9/1.9 Sprint 1.75/1.75 TRD .5/1.5 sent from my S4 on Mars

09-18-2014, 04:08 PM	#23
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	@JL512 - why are you posting your brake and rotor stuff on a "spring" thread? You've done the same thing on two other "spring" threads as well.