Imaginary STF build - Toyota Yaris Forums

CoryM · 12-31-2014, 10:26 PM

Regarding camber: I am also running about -2.8° and I wouldn't suggest any more (or any less really). I've tried a few different amounts of front camber (free alignments) and the loss of traction in braking and acceleration is just starting to show up with -2.8°. If your tires are wearing well you could drop down to -2.5° to gain that traction back, but I don't know that any Yaris would avoid edge wear due to the high CG.

xnamerxx · 01-01-2015, 02:09 AM

Quote:

Originally Posted by CoryM

Regarding camber: I am also running about -2.8° and I wouldn't suggest any more (or any less really). I've tried a few different amounts of front camber (free alignments) and the loss of traction in braking and acceleration is just starting to show up with -2.8°. If your tires are wearing well you could drop down to -2.5° to gain that traction back, but I don't know that any Yaris would avoid edge wear due to the high CG.

At -4.5 with 500f springs I was able to get even tire wear. It was a good setup for the most part but the car just really wanted to lock em up.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1NZ-FE All Motor Build	burned	Performance Modifications	19	10-24-2014 11:56 AM
Carbon build up in the throttle body	Sedan	DIY / Maintenance / Service	18	11-16-2013 12:44 AM
fnkngrv's custom trailer build log	fnkngrv	Off-topic / Other Cars / Everything else Discussions	5	10-12-2012 02:24 PM
Build Your Yaris, toyota.com	artyin	General Yaris / Vitz Discussion	3	05-03-2006 05:52 PM

12-31-2014, 10:26 PM	#1
CoryM Drives: 2009 5-door, 5-speed Join Date: Sep 2011 Location: White Rock BC Posts: 687	Regarding camber: I am also running about -2.8° and I wouldn't suggest any more (or any less really). I've tried a few different amounts of front camber (free alignments) and the loss of traction in braking and acceleration is just starting to show up with -2.8°. If your tires are wearing well you could drop down to -2.5° to gain that traction back, but I don't know that any Yaris would avoid edge wear due to the high CG.