2016 yaris sedan Cruise control

[Eduardo_mty]

Thank you, i will do tomorrow
I will do....
1. Remove the negative wire from battery.

2. Remove the EMC Connector.
2.1 remove the waterproof Rubber plug
2. 2 install a wire

3. Reconnect the EMC connector
4. Reconnect negative wire to battery

5. Turn on the key
5.1 check wire voltage , if show 12v, it will work

This is the steps that i will do, its ok

[laobo]

Originally Posted by Eduardo_mty

Thank you, i will do tomorrow
I will do....
1. Remove the negative wire from battery.

2. Remove the EMC Connector.
2.1 remove the waterproof Rubber plug
2. 2 install a wire

3. Reconnect the EMC connector
4. Reconnect negative wire to battery

5. Turn on the key
5.1 check wire voltage , if show 12v, it will work

This is the steps that i will do, its ok

Hi friend. Did you have? Review your final
Can you show me. which is number pin of ECM ( ECU) for signal ccs ?
my car is 2014-2017 year