transmission oil seal - Page 3 - Toyota Yaris Forums

kc0rpm · 04-11-2013, 10:08 PM

Oh yeah, a 19mm crows foot. Can't torque the ball joint without one. I found that mine had dissapeared and had to borrow one from the neighbor

kc0rpm · 04-11-2013, 10:12 PM

And as for parts stores having that seal, I can't even get a damn axle nut outside the dealer. My local parts stores carry nothing for the yaris except plugs, filters, and a special order axle. That's about it.

YarisSedan · 04-11-2013, 10:33 PM

Quote:

Originally Posted by kc0rpm

And as for parts stores having that seal, I can't even get a damn axle nut outside the dealer. My local parts stores carry nothing for the yaris except plugs, filters, and a special order axle. That's about it.

Dang forgot its different for other people who don't live in the bay area. Where I live theres probably about 35 part stores within a 20 mile radius. If you go to the dealer with the part numbers i listed then they should be able to get you the right part then no problem. Otherwise if you want to paypal me 5 bucks I can put one in a envelope with a stamp on it and send it your way.

kc0rpm · 04-11-2013, 10:35 PM

Well I have a part sitting at the dealer right now just wasn't able to make it there today. Hopefully I will have more time tomorrow and we will see if the numbers match up.

CTScott · 04-11-2013, 10:47 PM

Quote:

Originally Posted by YarisSedan

The part number you need is 90311-34042 for the left and 90311-34023 for the right Ishino makes it, it should be available at any local parts store not just the dealer. If you still cant get it let me know I have 5 in stock they are about 5 dollars each. (happen to work at a transmission shop)

From the EPC, I never would have guessed that 90311-34042 was that seal. 90311-34023 does make sense from the diagram though.

90311-34023
90311-34023.jpg

90311-34042
90311-34042.jpg

MGBball11 · 06-10-2015, 07:55 PM

Sorry if it's bad manners to resurrect a 2-year-old post. I'm a complete car novice, and a friend of mine is going to help me with a few repairs recommended by a local shop. I was told one of my output shaft seals is leaking. Should I get the parts mentioned by YarisSedan (90311-34042 for the left and 90311-34023 for the right)? I got a bit confused by the discussion about the dust cover versus the actual seal. Do I need to get both?

Any help would be appreciated!

CTScott · 06-10-2015, 09:42 PM

Quote:

Originally Posted by MGBball11

Sorry if it's bad manners to resurrect a 2-year-old post. I'm a complete car novice, and a friend of mine is going to help me with a few repairs recommended by a local shop. I was told one of my output shaft seals is leaking. Should I get the parts mentioned by YarisSedan (90311-34042 for the left and 90311-34023 for the right)? I got a bit confused by the discussion about the dust cover versus the actual seal. Do I need to get both?

Any help would be appreciated!

Correct - The parts listed by YarisSedan are the correct ones.

likoulou31 · 03-06-2016, 05:28 PM

Hi everyone,

My output shaft seal from passenger side (right) is leaking.
I bought new 75W90 (2L of motul motylgear) for repair and I have to buy parts to fix this but i'm a bit confused I know that I have to buy the 90311-34023 (90311-W0003 for Toyota's stores in France).

What about the dust cover which is 41336D ? Do I have to buy a new one or it won't be necessary to replace it ?

The Output shaft seal is 43410M :)

Sorry for my english ;)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 09:14 PM
Yaris Oil Change DIY	rningonfumes	DIY / Maintenance / Service	91	01-11-2019 08:18 PM
*The Engine Oil Bible*	Hussain-Vtec	Performance Modifications	20	09-28-2016 03:47 PM
A Mystery Oi'll Say!	Yar Is Word	Fuel Economy Forum	16	05-11-2013 05:22 AM
Motor oil debate - interesting info but a long read.	mikeukrainetz	General Yaris / Vitz Discussion	6	12-10-2006 09:16 PM

04-11-2013, 10:08 PM	#37
kc0rpm Drives: 08 yaris sedan Join Date: Mar 2013 Location: Decherd, TN Posts: 26	Oh yeah, a 19mm crows foot. Can't torque the ball joint without one. I found that mine had dissapeared and had to borrow one from the neighbor

04-11-2013, 10:12 PM	#38
kc0rpm Drives: 08 yaris sedan Join Date: Mar 2013 Location: Decherd, TN Posts: 26	And as for parts stores having that seal, I can't even get a damn axle nut outside the dealer. My local parts stores carry nothing for the yaris except plugs, filters, and a special order axle. That's about it.

04-11-2013, 10:35 PM	#40
kc0rpm Drives: 08 yaris sedan Join Date: Mar 2013 Location: Decherd, TN Posts: 26	Well I have a part sitting at the dealer right now just wasn't able to make it there today. Hopefully I will have more time tomorrow and we will see if the numbers match up.

06-10-2015, 07:55 PM	#42
MGBball11 I've made a post! Drives: 2008 Yaris Hatchback Join Date: Jun 2015 Location: Phoenix, AZ Posts: 1	Sorry if it's bad manners to resurrect a 2-year-old post. I'm a complete car novice, and a friend of mine is going to help me with a few repairs recommended by a local shop. I was told one of my output shaft seals is leaking. Should I get the parts mentioned by YarisSedan (90311-34042 for the left and 90311-34023 for the right)? I got a bit confused by the discussion about the dust cover versus the actual seal. Do I need to get both? Any help would be appreciated!

03-06-2016, 05:28 PM	#44
likoulou31 Drives: Toyota Yaris Join Date: Feb 2016 Location: France Posts: 10	Hi everyone, My output shaft seal from passenger side (right) is leaking. I bought new 75W90 (2L of motul motylgear) for repair and I have to buy parts to fix this but i'm a bit confused I know that I have to buy the 90311-34023 (90311-W0003 for Toyota's stores in France). What about the dust cover which is 41336D ? Do I have to buy a new one or it won't be necessary to replace it ? The Output shaft seal is 43410M :) Sorry for my english ;)