|
03-29-2016, 06:33 PM | #1 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
WTS: Runstop rear disk brake conversion kit
I bought a rear disk brake conversion kit from vten in April of 2013. It's still in the box he shipped it to me in. I figure with it being 3 years and I still haven't touched it, it's probably time to just let it go. Asking $350 + shipping. It's at my parents house, I'll be going by there tomorrow and can get some pictures of it.
EDIT: Adding pictures. Pads look good. Rotors have some rust but don't look bad. I'd recommend getting them surfaced but you could probably sandpaper them down. Kit looks to be complete from what I can tell. I didn't unwrap the other caliper because it was packed up pretty nice.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 Last edited by 47_MasoN_47; 03-30-2016 at 02:00 PM. |
03-29-2016, 07:15 PM | #2 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
I'll take it!
|
03-30-2016, 02:33 AM | #3 |
The Fit is NO!
Drives: '09 3DR "S"|'87 Caddy Brougham Join Date: Dec 2008
Location: jOakland
Posts: 279
|
If he doesn't take it, I will :-)
__________________
My OTHER car Please ignore the Ferrari |
03-30-2016, 04:22 PM | #4 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
Bump now that there are pics.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
04-05-2016, 02:36 PM | #5 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
FYI This is still for sale.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
04-05-2016, 04:14 PM | #6 |
Drives: 07 HB Yaris Join Date: Jan 2016
Location: Ithaca, NY
Posts: 10
|
Is it even possible to rebuild these? Like can you get parts at all?
|
04-06-2016, 08:17 AM | #7 |
iQ innovator & researcher
Drives: 2012 iQ Join Date: Mar 2016
Location: Central Pennsylvania
Posts: 199
|
Do we even know how to get replacement rotors, pads, caliper seals if any isn't working? Like what model did these orgininally come off? I know Micro Image and the Thailand guy were selling these, but leaving everybody in the dark as far as replacement parts to keep a "trade secret" that isn't even for sale any longer is just assinine......
*This is my opinion, not a reflection upon Micro Image or the Thailand guy, but an update for replacement parts would be nice....... |
04-13-2016, 09:06 AM | #8 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
I have no idea. The calipers are Brembo so I would think they still make them/pads for them but I've never tried to contact anyone at Runstop or Brembo about it. I just opened the box for the first time the other day.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
04-13-2016, 09:17 AM | #9 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,761
|
That's just a sticker that someone prior to you applied to the caliper. Here is what a new RunStop caliper looked like.
__________________
|
04-13-2016, 09:56 AM | #10 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
-_-
Good to know nonetheless. Anybody interested in this just make an offer. I'm never going to use it.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
04-15-2016, 10:33 AM | #11 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
If the rust is bothering anyone the pictures make the rotors look a lot worse than they are. The rust on the surface of the rotors is just cosmetic. I'd turn them anyway just because they're used and I don't know how they were treated before I got em. Little time with a wire wheel would clean the rest of the parts up easy enough.
Like I said, make an offer if you're interested.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
04-24-2016, 11:14 AM | #12 |
Drives: 2012 Yaris 5dr Hatch Join Date: Oct 2014
Location: Puerto Rico
Posts: 58
|
$120?
|
04-30-2016, 10:12 AM | #13 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
Eh, not gonna go that low. I'm gonna poke around and see if I can figure out what sort of calipers/etc. this kit can be refreshed with. When I get some time I'll see if I can clean up the rust as well.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
05-04-2016, 10:42 AM | #14 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
Haven't had time to mess with this.
Price drop to $200 shipped OBO.
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
05-04-2016, 11:15 AM | #15 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
Do these need a different rear axle from oem to make it work or are they bolt on?
__________________
No one ever wants to give a Yaris the point by... |
05-04-2016, 11:21 AM | #16 | |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,761
|
Quote:
http://www.yarisworld.com/forums/showthread.php?t=12489
__________________
|
|
05-04-2016, 12:00 PM | #17 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
Hmm, these look more appealing now...now to find $200 that I don't have lol
Edit: damn just realized I need 15mm rims (winters are 14") and I don't need disc brakes bad enough to deal with bending brake line etc. $200 is a great deal though
__________________
No one ever wants to give a Yaris the point by... Last edited by tmontague; 05-04-2016 at 01:56 PM. |
05-04-2016, 01:18 PM | #18 |
Drives: 2010 black yaris Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
|
I will buy if you will accept $250 shipped as is.
__________________
-Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting." |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AT to MT Conversion Kit Clearance Sale | CTScott | Items for Sale by private party | 26 | 06-08-2015 07:27 PM |
When will the Yaris hit the showrooms at dealers? | Petrolhead | New YARIS Purchase Forum | 181 | 11-28-2011 07:03 AM |
XenithXenon HID Conversion Kit | CorSport | CorSport | 0 | 09-03-2009 05:11 PM |
Catback exhausts and rear disc brake conversions | eTiMaGo | Performance Modifications | 59 | 01-04-2009 06:13 PM |
Rear brake proportioning valve??? | PetersRedYaris | DIY / Maintenance / Service | 16 | 03-25-2007 11:10 PM |