Found another annoying rattle location to conquer.

[kimona]

^^^ The plastic clips had broken off both lights, so I used black 3M 2-sided tape and made a "gasket" that fit the back of the light. Once it was adhered to the back, I used a razor blade to trim it nicely around the perimeter. I cleaned the fender, peeled off the paper, and press fit the marker lights in place. It worked well and never gave me a problem.

BTW, if someone wants/needs new markers, you can get them here:

http://www.ebay.com/itm/2-Side-Turn-...3D232257992678