trd shocks

[brickhardmeat]

Originally Posted by Ran Kizama

There are not new bump stops in the box. Use your old ones. I asked my tech at Toyota here and he said to not cut the bumpstops. The shocks are designed to work with the factory bumpstops.

I would opt not to cut myself. However, this is something that there seems to be a big difference of opinion on.

[Chris07LB]

Originally Posted by brickhardmeat

I would opt not to cut myself. However, this is something that there seems to be a big difference of opinion on.

No opinions. TRD's are a matched set, designed to work together. No bump stop cutting required.

Every other single spring ONLY change you make, needs the bump stop to be cut to their spec's when lower with STOCK ORIGINAL struts and springs.

Guys are talking out their ass on the topic, because they have no clue what they are talking about... again, like you said, "OPINION," not facts are being talked about.