New Car = Must Mod?

[Brighton]

Originally Posted by ern-diz

My 2 cents? Do to your car whatever makes you happy.

Life's short.

1. I think at some point I read about some other cars' seats fitting into the Yaris without modification, but I'm not 100% sure. I wasn't happy with the foam, dough boy seats that came in the car either, so I went with the sparco R100 seats. About as cheap as a proper bucket seat is going to get and they look fantastic, imo. My sponsor sells them, so I can get a discount on their listed price.

2. Never heard of Joying head units.

3. Depending on offset, you can go up to about a 17" wheel with no rubbing, if on factory suspension. Offset and lowering changes things.

4. Don't know anyone that has installed MF exhaust on these cars. Most go with Tanabe. Like the sparco bucket seats, my sponsor sells MF exhaust for the Yaris and I can get a discount on their listed price.

5. Lots of cruise control posts/info. As others have mentioned, you'll find searching the forum to be very useful.

Thanks for it input! I went ahead and ordered a cheap aftermarket but OE spec muffler to get it past inspection for now, then gonna do the magnaflow cat back down the line.

Also this is the head unit I'm referring to. It's a direct swap into the existing hole in the dash which is why I'm drawn to it, but it looks like sketchy chinese junk so wanted to see if there was anyone who had already gotten it.
https://www.joyingauto.com/joying-la...-with-dsp.html

And I'll scour the junkyards for seats to see what fits as well as wheels/tires down the line!

[ern-diz]

Originally Posted by Brighton

Thanks for it input! I went ahead and ordered a cheap aftermarket but OE spec muffler to get it past inspection for now, then gonna do the magnaflow cat back down the line.

Also this is the head unit I'm referring to. It's a direct swap into the existing hole in the dash which is why I'm drawn to it, but it looks like sketchy chinese junk so wanted to see if there was anyone who had already gotten it.
https://www.joyingauto.com/joying-la...-with-dsp.html

And I'll scour the junkyards for seats to see what fits as well as wheels/tires down the line!

Looking forward to following your progress