Suspension part interchangeability for 2015 5 door hatch back

[Calrenman]

What does the adjustment do? Camber? Or just stiffen the ride?

Is the tanabe four bolts or two?

Do you have a part # or link handy?

I am new to the mods on this car. My car has been in a fender bender so adjustment may be a good call. Car tracks well. I cannot wait to put the sway bar on. The freeway is wobbly in the wind.

Thanks for the heads up.

[mitch9521]

Originally Posted by Calrenman

What does the adjustment do? Camber? Or just stiffen the ride?

Is the tanabe four bolts or two?

Do you have a part # or link handy?

I am new to the mods on this car. My car has been in a fender bender so adjustment may be a good call. Car tracks well. I cannot wait to put the sway bar on. The freeway is wobbly in the wind.

Thanks for the heads up.

Tanabe part number should be: NST45.
I got mine from RHDJapan.


This link should help you:

https://www.yarisworld.com/forums/showthread.php?t=2285

[Calrenman]

Hello Mitch. Did you install the bar yet?
Is there a difference?

Originally Posted by mitch9521

Tanabe part number should be: NST45.
I got mine from RHDJapan.


This link should help you:

https://www.yarisworld.com/forums/showthread.php?t=2285

[mitch9521]

Originally Posted by Calrenman

Hello Mitch. Did you install the bar yet?
Is there a difference?

No I ran out of time and didn't get around to installing the strut bar. Its on the list lol.

Planning a wedding eats up alot of time.

On the other hand, my exhaust came in from Japan so I get to install that too at some point

[Calrenman]

did you get a "cat back" exhaust? Good luck with the wedding.

Originally Posted by mitch9521

No I ran out of time and didn't get around to installing the strut bar. Its on the list lol.

Planning a wedding eats up alot of time.

On the other hand, my exhaust came in from Japan so I get to install that too at some point

[mitch9521]

Originally Posted by Calrenman

did you get a "cat back" exhaust? Good luck with the wedding.

Yes. I got a Fujitsubo Authorize RM from Japan.

[mitch9521]

Originally Posted by Calrenman

did you get a "cat back" exhaust? Good luck with the wedding.

Here is the strut bar, fits like a glove. Mounting the brackets is a pain, there isn't enough clearance between the bolt and strut assembly for a socket/extension so it requires alot of patience but other than that it fit perfectly. Might be easier if you remove the wiper cowl but I did not.

[Calrenman]

It looks nice. A whole lot of Quarter turns... sucky! I will probably drop the strut. The 2015s had a recall for the strut bearings. So I will check them. Your car looks good!

Did you "tune" the front end or just put the bar in snug?

Originally Posted by mitch9521

Here is the strut bar, fits like a glove. Mounting the brackets is a pain, there isn't enough clearance between the bolt and strut assembly for a socket/extension so it requires alot of patience but other than that it fit perfectly. Might be easier if you remove the wiper cowl but I did not.