Stuck trying to get bolt off! - Page 2 - Toyota Yaris Forums

phaznet · 01-10-2013, 05:40 PM

I believe the sound is metal on metal!
I have a feeling that's what it is, I bent the piece back a bit and it helped. I'll have to take the wheel off again and bend it a bit more, hope that will fix it. I

yaris2010RS · 01-11-2013, 11:02 AM

yeah, mine was touching on the bottom side

thebarber · 01-11-2013, 07:59 PM

Sounds like the brake dust shield

phaznet · 01-14-2013, 04:33 PM

Turned out it was both the brake dust shield and the inner wheel well. For some reason the front part of the inner wheel well was bent inwards, so I bent it back. No more issues with rubbing!!

Now I've measured the distance between when center of the wheel to the fender on the front wheels and I see about a 3mm difference. Should I be concerned?

thebarber · 01-15-2013, 05:30 PM

Nah

yaris2010RS · 01-15-2013, 08:51 PM

Well u can b concerned.....but it wont do you any good.

phaznet · 01-15-2013, 10:08 PM

Awesome, thanks!

I bought these springs used - maybe it sagged more on the driver side because the previous owner rode solo?

yaris2010RS · 01-15-2013, 10:14 PM

3mm is nothing

01-11-2013, 11:02 AM	#20
yaris2010RS View User's Garage Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009 Location: Angus, Ontario Posts: 1,891	yeah, mine was touching on the bottom side __________________ If it has boobs or wheels sooner or later your gonna have problems with it

01-11-2013, 07:59 PM	#21
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	Sounds like the brake dust shield __________________

01-15-2013, 05:30 PM	#23
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	Nah __________________

01-15-2013, 08:51 PM	#24
yaris2010RS View User's Garage Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009 Location: Angus, Ontario Posts: 1,891	Well u can b concerned.....but it wont do you any good. __________________ If it has boobs or wheels sooner or later your gonna have problems with it

01-15-2013, 10:14 PM	#26
yaris2010RS View User's Garage Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009 Location: Angus, Ontario Posts: 1,891	3mm is nothing __________________ If it has boobs or wheels sooner or later your gonna have problems with it

01-10-2013, 05:40 PM	#19
phaznet View User's Garage Drives: '07 Yaris Sdn Join Date: Feb 2009 Location: YGK Posts: 151	I believe the sound is metal on metal! I have a feeling that's what it is, I bent the piece back a bit and it helped. I'll have to take the wheel off again and bend it a bit more, hope that will fix it. I

01-14-2013, 04:33 PM	#22
phaznet View User's Garage Drives: '07 Yaris Sdn Join Date: Feb 2009 Location: YGK Posts: 151	Turned out it was both the brake dust shield and the inner wheel well. For some reason the front part of the inner wheel well was bent inwards, so I bent it back. No more issues with rubbing!! Now I've measured the distance between when center of the wheel to the fender on the front wheels and I see about a 3mm difference. Should I be concerned?

01-15-2013, 10:08 PM	#25
phaznet View User's Garage Drives: '07 Yaris Sdn Join Date: Feb 2009 Location: YGK Posts: 151	Awesome, thanks! I bought these springs used - maybe it sagged more on the driver side because the previous owner rode solo?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 08:14 PM
Warning - Broken control arm bolt!	CB900F2	DIY / Maintenance / Service	460	08-23-2020 05:54 PM
identify this bolt?	steve1031	DIY / Maintenance / Service	2	12-26-2012 05:14 PM
bottom long bolt for alternator	yaris9876	DIY / Maintenance / Service	5	05-24-2010 02:02 PM
FS CA: SS dress up bolt and washer	AlainMikli	Items for Sale by private party	9	11-05-2009 02:06 AM