Want to build costom turbo kit. Need advice from boosted guys! - Page 29 - Toyota Yaris Forums

Yoda · 06-28-2012, 04:01 PM

didn't know it was in stock. Is it the proto type?

pimp my yaris · 06-28-2012, 11:08 PM

Quote:

Originally Posted by Yoda

didn't know it was in stock. Is it the proto type?

It is the final design. He sent me one early. The rest are going out for polishing. I was in a big hurry. I havent mounted it yet, I am still working on getting all the needed fittings. Mabe this week end I get some some real work done.

cali yaris · 06-29-2012, 01:43 AM

Should have finished and polished production stock early next week.

fnkngrv · 06-29-2012, 11:54 AM

^ Jog memory Garm, where are the inlet and outlet ports in regards to orientation drivers/passengers side?

fnkngrv · 06-29-2012, 11:55 AM

I am going in for my new tune on the 9th. I will shoot video to show fuel pressure ration under boost to add to my article on fuel system upgrading.

Yoda · 06-29-2012, 12:53 PM

Not too bad put me down for one. Post or pm me cost so I can put it aside plz.

cali yaris · 06-29-2012, 01:15 PM

$149.95 shipped, going up into the store today.

As for direction, my regulator and gauge are on the driver side, I thought that was the inlet because of that. I will confirm with Art, I suppose it could be plumbed the other way?

ChinGy · 06-29-2012, 01:31 PM

Hi, I'm in the process of fitting a turbo to my Yaris 1NZ-FE. Just wondering if you could help. Which one is the oil pressure switch, the one that sits behind the intake manifold or the one that's slightly below it?

Cali Yaris, does the fuel rail require a piece of the valve cover to be chopped off like the perrin and OBX?

fnkngrv · 06-29-2012, 01:47 PM

Quote:

Originally Posted by cali yaris

I will confirm with Art, I suppose it could be plumbed the other way?

Cool...I could be confused, but I thought that Art had said that was the case.

cali yaris · 06-29-2012, 02:07 PM

Quote:

Cali Yaris, does the fuel rail require a piece of the valve cover to be chopped off like the perrin and OBX?

We don't think so. My car looks intact and the rail fits nicely. I'll take some pictures today to show more detail of it installed.

cali yaris · 06-29-2012, 02:50 PM

Here are a few shots of my set up, I think the "tabs" on the valve cover are intact.

Yoda · 06-30-2012, 06:48 AM

Quote:

Originally Posted by cali yaris

$149.95 shipped, going up into the store today.

As for direction, my regulator and gauge are on the driver side, I thought that was the inlet because of that. I will confirm with Art, I suppose it could be plumbed the other way?

Ordered

Bluevitz-rs · 06-30-2012, 08:07 AM

[QUOTE=cali yaris;654030]Here are a few shots of my set up, I think the "tabs" on the valve cover are intact.

No, there was a tab on the transmission side of the cover that's been removed. But it's nothing a hacksaw can't care of in short order.

Bluevitz-rs · 06-30-2012, 08:07 AM

Quote:

Originally Posted by cali yaris

Here are a few shots of my set up, I think the "tabs" on the valve cover are intact.

No, there was a tab on the transmission side of the cover that's been removed. But it's nothing a hacksaw can't care of in short order.

cali yaris · 06-30-2012, 03:11 PM

Someone please post some decent pics of their stock valve cover.

Bluevitz-rs · 06-30-2012, 03:36 PM

Found one on eBay.

packetrace · 06-30-2012, 05:21 PM

Quote:

Originally Posted by cali yaris

Here are a few shots of my set up, I think the "tabs" on the valve cover are intact.

Love the red strut bar color matched with valve cover :)

cali yaris · 06-30-2012, 06:37 PM

blue-vitz, it doesn't look like the fuel rail would cause a problem with the driver side "tab'. My regulator doesn't have to be positioned there, which would be in the way. Maybe it's because of the intake mani instead?

I guess we'll know when pimp does his install.

@ packet -- yeah things have to match in my world or I can't sleep. Tanabe is supposed to give me a new sticker for the powdercoated strut brace.

06-29-2012, 01:43 AM	#507
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Should have finished and polished production stock early next week. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-29-2012, 11:54 AM	#508
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	^ Jog memory Garm, where are the inlet and outlet ports in regards to orientation drivers/passengers side? __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

06-29-2012, 11:55 AM	#509
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	I am going in for my new tune on the 9th. I will shoot video to show fuel pressure ration under boost to add to my article on fuel system upgrading. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

06-29-2012, 01:15 PM	#511
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	$149.95 shipped, going up into the store today. As for direction, my regulator and gauge are on the driver side, I thought that was the inlet because of that. I will confirm with Art, I suppose it could be plumbed the other way? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-29-2012, 02:50 PM	#515
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Here are a few shots of my set up, I think the "tabs" on the valve cover are intact. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-28-2012, 04:01 PM	#505
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	didn't know it was in stock. Is it the proto type?

06-29-2012, 12:53 PM	#510
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	Not too bad put me down for one. Post or pm me cost so I can put it aside plz.

06-29-2012, 01:31 PM	#512
ChinGy Drives: Yaris T Sport Join Date: Jan 2011 Location: London Posts: 6	Hi, I'm in the process of fitting a turbo to my Yaris 1NZ-FE. Just wondering if you could help. Which one is the oil pressure switch, the one that sits behind the intake manifold or the one that's slightly below it? Cali Yaris, does the fuel rail require a piece of the valve cover to be chopped off like the perrin and OBX?

06-30-2012, 08:07 AM	#517
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	[QUOTE=cali yaris;654030]Here are a few shots of my set up, I think the "tabs" on the valve cover are intact. No, there was a tab on the transmission side of the cover that's been removed. But it's nothing a hacksaw can't care of in short order.

06-30-2012, 03:11 PM	#519
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Someone please post some decent pics of their stock valve cover. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

06-30-2012, 03:36 PM	#520
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	Found one on eBay.

06-30-2012, 06:37 PM	#522
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	blue-vitz, it doesn't look like the fuel rail would cause a problem with the driver side "tab'. My regulator doesn't have to be positioned there, which would be in the way. Maybe it's because of the intake mani instead? I guess we'll know when pimp does his install. @ packet -- yeah things have to match in my world or I can't sleep. Tanabe is supposed to give me a new sticker for the powdercoated strut brace. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Under $2500 Turbo Kit w/Intercooler coming soon!	cdydjded	Forced Induction Forum	58	09-23-2007 02:02 PM
turbo manifold build...	joey1320	Forced Induction Forum	4	06-30-2007 02:26 PM
ZPI to produce yaris turbo kit and exhaust	turboyaris	Forced Induction Forum	15	06-09-2007 01:24 AM
ZPI soon to release their turbo kit	turboyaris	Forced Induction Forum	10	04-26-2007 02:52 PM
ZPI to produce yaris turbo kit and exhaust	turboyaris	Forced Induction Forum	30	04-04-2007 02:10 PM