Problem with Projector Halo :( - Toyota Yaris Forums

jmew0ng · 01-13-2009, 11:26 PM

Well I bought my projector(the depoautolight one) off of an ebay store, everything went great except only 3 out of 4 halo's work... my right front halo doesn't work =(

So I was wondering is it possible to just cut the wire connecting to the front left one so it'll look even, or will that completely drop the 2nd one as well?

PHXDEMON · 01-13-2009, 11:30 PM

Try it and find out

you can always reconnect wires. I would assume it wouldn't affect it however considering if the LED it burnt out of the other light then it probably isn't completing the circuit.

jmew0ng · 01-13-2009, 11:38 PM

Yeah, I'll give that a shot in the morning then.. maybe you'll be able to see my car around phoenix! XD

jinxor · 01-14-2009, 12:16 AM

Yep, you can try to remove the connection from the led lights, and try to reconnect them. Or rather, only try and connect the led and see if they are functional.

PETERPOOP · 01-14-2009, 12:44 AM

Don't be surprised with lights like those.

PHXDEMON · 01-14-2009, 06:06 AM

Quote:

Originally Posted by jmew0ng

Yeah, I'll give that a shot in the morning then.. maybe you'll be able to see my car around phoenix! XD

If you are ever downtown. I work in park central mall so you can find my car on the upper level in the parking lot in the northwest side

GreenSpeed · 01-15-2009, 09:08 AM

I just picked up a pair as well off eBay and had the same issue. Simple fix was to go to Radio Shack. They have small white LED's that are the same size that you can solder in place of the old ones. Works great now.

01-13-2009, 11:26 PM	#1
jmew0ng Drives: Scion FRS Join Date: Aug 2006 Location: Arizona Posts: 179	Problem with Projector Halo :( Well I bought my projector(the depoautolight one) off of an ebay store, everything went great except only 3 out of 4 halo's work... my right front halo doesn't work =( So I was wondering is it possible to just cut the wire connecting to the front left one so it'll look even, or will that completely drop the 2nd one as well?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
electrical problem with car need help badly!!	Adriaan	DIY / Maintenance / Service	20	05-07-2010 12:40 AM
Cruise Control pulsing problem.	rg570lvr	General Yaris / Vitz Discussion	14	12-07-2008 04:55 PM
Yaris 06 H/B Engine Cutting out problem..	Farenheit	General Yaris / Vitz Discussion	3	09-14-2007 01:21 PM
HELP!! HID problem	07yaris_fe	General Yaris / Vitz Discussion	2	11-20-2006 06:00 AM
Service Problem	Lizardboy	DIY / Maintenance / Service	19	10-06-2006 09:12 PM

01-13-2009, 11:30 PM	#2
PHXDEMON View User's Garage Drives: 2007 Red Liftback Join Date: Oct 2008 Location: Phoenix, AZ Posts: 885	Try it and find out you can always reconnect wires. I would assume it wouldn't affect it however considering if the LED it burnt out of the other light then it probably isn't completing the circuit.

01-13-2009, 11:38 PM	#3
jmew0ng Drives: Scion FRS Join Date: Aug 2006 Location: Arizona Posts: 179	Yeah, I'll give that a shot in the morning then.. maybe you'll be able to see my car around phoenix! XD

01-14-2009, 12:44 AM	#5
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	Don't be surprised with lights like those.

01-15-2009, 09:08 AM	#7
GreenSpeed Drives: '08 Yaris LB Join Date: Oct 2008 Location: The Sea of Salt Posts: 61	I just picked up a pair as well off eBay and had the same issue. Simple fix was to go to Radio Shack. They have small white LED's that are the same size that you can solder in place of the old ones. Works great now.