|
10-28-2008, 09:38 PM | #1 |
What kind of car is that?
|
what LEDs come in the 3 spots on the projectors?
im going to replace them with amber ones
i wired them up to the turn signals because i didn't want them running all the time it's a little too much going on for me
__________________
|
10-28-2008, 10:07 PM | #2 |
What kind of car is that?
|
bump
__________________
|
10-28-2008, 10:57 PM | #3 |
probably a 3mm led with a 470 resistor or a 5mm led with a 470 resistor standard two prong led
__________________
08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified |
|
10-29-2008, 01:32 AM | #4 |
Mod Freak
Drives: 88 MR2 GT Join Date: Oct 2008
Location: Gainesville, TX
Posts: 147
|
they are not standard 2 prong 5mm LED's they are a 4 prong. I was going to change mine from white to blue, and noticed they were the 4 prong type mounted on a small PCB. So you will have to de-solder the led and re-solder new one and a resistor inline with it. you can just throw away the wires that came off the old leds seeing as you will have a resistor inline with the new leds
__________________
http://www.cardomain.com/ride/3160999 |
10-29-2008, 07:08 AM | #5 |
What kind of car is that?
|
thanks for the info :)
__________________
|
10-29-2008, 07:55 AM | #6 | |
Quote:
__________________
08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified |
||
10-29-2008, 08:15 AM | #7 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
10-29-2008, 11:37 AM | #8 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
10-29-2008, 08:11 PM | #9 |
yup exactly like those damn cali beat me to it but if you need 4 prong surface mount leds you can get them there to there pretty good with warranties and shipping stuff out and there prices are cheap ive been trying to get these guys on the forums since they advertise on scionlife.com
__________________
08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified |
|
10-29-2008, 09:00 PM | #10 |
What kind of car is that?
|
great!
once i get my paycheck i will look into hooking up the ambers :)
__________________
|
10-30-2008, 03:23 AM | #11 |
Mod Freak
Drives: 88 MR2 GT Join Date: Oct 2008
Location: Gainesville, TX
Posts: 147
|
I'll go take a pic and post it I'll remove one t get a good pic
__________________
http://www.cardomain.com/ride/3160999 |
10-30-2008, 03:27 AM | #12 |
Mod Freak
Drives: 88 MR2 GT Join Date: Oct 2008
Location: Gainesville, TX
Posts: 147
|
k just removed one it is on a 194 base so just get any 194 type led bulb like the ones in the map lights like these.
you will need 6 total 3 per side. if you want to wire them up to the turn signal then just wire them to the turn signal in the top of the headlight. the white wire on the led's are the positive and the black is the negative. just remember the highleds have resistors installed in them so don't wire up the resistor pack that the 3 leds are currently installed with you can just discard it.
__________________
http://www.cardomain.com/ride/3160999 Last edited by Midon; 10-30-2008 at 03:38 AM. |
10-30-2008, 06:37 AM | #13 |
get em cheap at superbrightleds.com, but doesnt it also matter on who makes them so they could be all different types of bulbs cause the ones that came with my headlights on my tc was a two prong led and i had like 10 of them wired together with resistors in line
__________________
08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Water Spots | RogueYaris | Wash, Wax, Detailing, Exterior Repairs | 23 | 05-09-2009 11:42 PM |
GROUP BUY - JDM (RS) Vitz LED Tail Lamp ... | riceboy | Items for Sale by private party | 453 | 07-14-2007 08:30 AM |
FS TL PROJECTORS | sam07yaris | Items for Sale by private party | 3 | 07-06-2007 04:18 PM |
Racing Spots | blake111887 | NY / NJ/ CT / PA | 10 | 05-17-2007 08:07 PM |
Cheap LEDs Interior and Exterior | jamal1984 | Cosmetic Modifications (Exterior/Interior) | 10 | 04-11-2007 11:08 AM |