my new exhaust that i made last night - Toyota Yaris Forums

malibuguy · 04-14-2011, 06:35 PM

2" mandrel-bent 409ss tubing from the manifold-back. MBS Performance 100cell Race catalytic converter, 2 Borla resonators & exiting with an Aspec ITB muffler.

http://www.youtube.com/watch?v=QPNziKtxzvU

SLIK4 · 04-14-2011, 07:46 PM

very nice!!! one of the cleanest custom exhaust setups i've ever seen too :)

Jason@SportsCar · 04-14-2011, 08:35 PM

Nice welds.

I would keep an eye on the bumper, that tips looks a little too close.

malibuguy · 04-14-2011, 09:02 PM

Quote:

Originally Posted by SLIK4

very nice!!! one of the cleanest custom exhaust setups i've ever seen too :)

thanks...its what i do for a living...i figure i finally have a nice car, so picked a nice little muffler for it that you don't see often

Quote:

Originally Posted by Jason@SportsCar

Nice welds.

I would keep an eye on the bumper, that tips looks a little too close.

it looks close, but the rolled edge is actually right where the bumper rolls up...so the closest it gets is just over 5/16" of an inch (my closest gap rule of thumb) right in the middle of the length of the tip

by the way...in the pictures the exhaust is barely a day old...i LOVE the colors an SS exhaust turns into when its sized properly

matthewai · 04-15-2011, 03:05 AM

any sound clips? how much did the materials cost ?

malibuguy · 04-15-2011, 07:41 AM

sound clip is posted after the last picture

on the street this would cost you about $550

Thirty-Nine · 04-15-2011, 06:04 PM

Very nice, and it sounds great.

JTDBT903 · 04-15-2011, 06:21 PM

Looks and sounds very good! Any better performance?
How about a clip of it taking off down the street?
Why 2 resonators?

I have a stainless muffler that I found at the side of the road that I want to make into a axleback. What kind of connecter is that called over the axle? Do they carry them at the parts store?

matthewai · 04-15-2011, 06:21 PM

oh didnt see the link...is the cabin noise loud?

Kaotic Lazagna · 04-15-2011, 10:42 PM

Best sounding NA 1NZ imo.

Oh, I don't think you'll have to worry about the tip being too close to the bumper. Look how close mine is, and I've had it like this for quite some time now.

matthewai · 04-22-2011, 06:19 PM

Quote:

Originally Posted by Kaotic Lazagna

Best sounding NA 1NZ imo.

Oh, I don't think you'll have to worry about the tip being too close to the bumper. Look how close mine is, and I've had it like this for quite some time now.

hey is this on a sedan i want to get a dual tip is this welded on cause the end of the oem is angled down so i feel like a dual would only work if it came out straight

Kaotic Lazagna · 04-23-2011, 04:40 PM

Quote:

Originally Posted by matthewai

hey is this on a sedan i want to get a dual tip is this welded on cause the end of the oem is angled down so i feel like a dual would only work if it came out straight

Yes, this is on my sedan. If you want to do a center exit tip like mine, you'll need to cut off the rear jack point. Just a heads up.

matthewai · 04-23-2011, 05:09 PM

Quote:

Originally Posted by Kaotic Lazagna

Yes, this is on my sedan. If you want to do a center exit tip like mine, you'll need to cut off the rear jack point. Just a heads up.

ohh i didnt realize it was in the center

Kaotic Lazagna · 04-24-2011, 03:51 PM

Quote:

Originally Posted by matthewai

ohh i didnt realize it was in the center

hahaha, yeah, I was one of the first to do a center exit exhaust.

big lo · 04-16-2011, 07:57 AM

^Now that's close, lol. Nice clean job all around, awesome stuff bro

JumpmanYaris · 04-16-2011, 10:17 AM

Looks good

malibuguy · 04-16-2011, 12:07 PM

thanks guys.

this is my daily driver so i did not want it too loud, so thats why i went with 2 resonators...also with my main "muffler" being kinda of small. I drive 500plus miles a week...tho i seem to be racking up more...i've only had the car for about 45-50 days & already have 5600miles on it.

it does have mild drone, but its not too bad...its really only when under load at too low of an rpm...like 5th gear at 30mph up a hill type shit. cruising down the highway it just barely noticeable over the tires (which are at 50psi so they scream a little)

all in all i'm very happy with it & i hope to pick up some gas mileage mainly from the race cat...if it drops...i'll probably sell the exhaust & go back to stock & throw a tip on it or something

Bluevitz-rs · 04-17-2011, 07:09 AM

What size pipe did you use, 2"? Let us know if the millage changes due to the new system.

04-14-2011, 06:35 PM	#1
malibuguy Obsessed with 1.5L Drives: '10 PW Yaris Sedan Join Date: Feb 2011 Location: Westminster, MD Posts: 908	my new exhaust that i made last night 2" mandrel-bent 409ss tubing from the manifold-back. MBS Performance 100cell Race catalytic converter, 2 Borla resonators & exiting with an Aspec ITB muffler. http://www.youtube.com/watch?v=QPNziKtxzvU __________________ -Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr

04-14-2011, 08:35 PM	#3
Jason@SportsCar Drives: 2015 H Production Yaris Join Date: Oct 2009 Location: Debary, FL Posts: 1,953	Nice welds. I would keep an eye on the bumper, that tips looks a little too close. __________________ 2005-2008 SCCA Solo BS National Champion 2017-2018 SCCA H Prod National Champion

04-15-2011, 07:41 AM	#6
malibuguy Obsessed with 1.5L Drives: '10 PW Yaris Sedan Join Date: Feb 2011 Location: Westminster, MD Posts: 908	sound clip is posted after the last picture on the street this would cost you about $550 __________________ -Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr

04-15-2011, 06:04 PM	#7
Thirty-Nine Small cars are a big deal View User's Garage Drives: 2007 Yaris Liftback Join Date: Feb 2006 Location: Portland, OR Posts: 3,144	Very nice, and it sounds great. __________________ Subcompact Culture: The Small car blog

04-15-2011, 06:21 PM	#8
JTDBT903 Drives: '08 SEDAN 5 SPD. Join Date: Aug 2009 Location: NE. OHIO Posts: 125	Looks and sounds very good! Any better performance? How about a clip of it taking off down the street? Why 2 resonators? I have a stainless muffler that I found at the side of the road that I want to make into a axleback. What kind of connecter is that called over the axle? Do they carry them at the parts store? __________________

04-14-2011, 07:46 PM	#2
SLIK4 Michael Drives: 07 Silver Yaris Sedan Join Date: May 2007 Location: Clearwater, Kansas Posts: 281	very nice!!! one of the cleanest custom exhaust setups i've ever seen too :)

04-15-2011, 03:05 AM	#5
matthewai Drives: it is kinda stock Join Date: Oct 2010 Location: united states Posts: 1,258	any sound clips? how much did the materials cost ?

04-15-2011, 10:42 PM	#10
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Best sounding NA 1NZ imo. Oh, I don't think you'll have to worry about the tip being too close to the bumper. Look how close mine is, and I've had it like this for quite some time now.

04-16-2011, 07:57 AM	#15
big lo View User's Garage Drives: 2007 VIOS Join Date: May 2010 Location: Loiza,Puerto Rico Posts: 1,121	^Now that's close, lol. Nice clean job all around, awesome stuff bro __________________ TRD sportivo springs,Tokico Blue Shock/Struts,TRD rear sway bar & front bar,Tanabe engine bar,MI hoses (red), MI engine cover,SRI intake,VIOS vent visors,VIOS foglights,VIOS tails (HELLA lights & the Series 5 too),VIOS radio,VIOS badge,VIOS grill,18 inch R-1 rims wrapped in nankang tires 215/35-18z,chrome handles,retrofited the headlights, SHARK body kit (VIOS), Coming soon projectors heads with LED strip, Custom seats, MI hood lifts,MI momo steering wheel, sound system :)

04-16-2011, 12:07 PM	#17
malibuguy Obsessed with 1.5L Drives: '10 PW Yaris Sedan Join Date: Feb 2011 Location: Westminster, MD Posts: 908	thanks guys. this is my daily driver so i did not want it too loud, so thats why i went with 2 resonators...also with my main "muffler" being kinda of small. I drive 500plus miles a week...tho i seem to be racking up more...i've only had the car for about 45-50 days & already have 5600miles on it. it does have mild drone, but its not too bad...its really only when under load at too low of an rpm...like 5th gear at 30mph up a hill type shit. cruising down the highway it just barely noticeable over the tires (which are at 50psi so they scream a little) all in all i'm very happy with it & i hope to pick up some gas mileage mainly from the race cat...if it drops...i'll probably sell the exhaust & go back to stock & throw a tip on it or something __________________ -Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr

04-17-2011, 07:09 AM	#18
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	What size pipe did you use, 2"? Let us know if the millage changes due to the new system.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Installing Greddy TI-C Exhaust System	redyaris	DIY / Maintenance / Service	13	08-01-2009 04:05 AM
MacNeil Automotive products misrepresentations	tomjasz	Cosmetic Modifications (Exterior/Interior)	44	11-05-2006 04:06 PM
What aftermarket exhaust will fit the Yaris Sedan?	dngz	Performance Modifications	2	10-02-2006 01:41 PM
Performance exhaust systems for yaris	aucorium	Performance Modifications	6	08-16-2006 08:12 AM
Toyota Performance Exhaust for Yaris HB	bigsky2	Performance Modifications	16	06-02-2006 10:21 AM