need help: foglight indicator - where are the wires?

[CTScott]

Originally Posted by cyberfrogg

oooooohhh!!! Sorry! I was at school and didnt see there was a picture there... Im understanding it more. my only questions are:

How do I open the switch to see what the picture shows?

where/what is the diode?

what are the two jumper cables and where do I solder them?

and what do u mean by "If the pads for the switch are bridged together (where the word "switch" is between two sets of 3 pads), separate them."?

sorry again and thanks...

To open it, there should be two tabs about 3/4" above the connector that can be pressed in to pull the connector and circuit board away from the housing.

The diode is the orange and black device.

The "jumpers" are two pieces of insulated wire that you will need to strip the ends of a solder them between the indicated endpoints.

By bridged I mean connected. They may have a silver solder blob (silver) connecting them or there may be a trace (shiny green) connecting them.