Weight Deduction - Toyota Yaris Forums

severous01 · 04-05-2010, 04:17 PM

civic, lancer, g5/cobalt, fit, versa, corolla, and too many others to think about....o, there is one more...the smart car lol

any way, you got a lot more to go, you still got:
carpets
non-essencial glass can be changed to lexan or poly
carbon fiber or fiberglass door skins
CF hatch
headliner removed
door panels with sheetmetal or fiber
center console
lightweight seats
FG dash
radio and speakers, amp if you got it can go
excess wiring can be trimmed
wires re-routed and trimmed (instead of a switch on left and right side windows you can move to the center)
replace steel parts with aluminum
trim up control arms and knuckles...

there's tons of stuff you can still do to reduce weight. not saying any of it will be cheap or look good, but you still got a long way to go before you got no options left.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Weight Loss Support Group	DorytheYaris	Off-topic / Other Cars / Everything else Discussions	118	02-22-2011 06:32 AM
Weight Reductions	scape	General Yaris / Vitz Discussion	34	06-08-2009 02:31 PM
Weight Savings	03Z33	Performance Modifications	30	01-31-2009 04:14 PM
Weight Savings - Removal, Reduction, Reminder....	TRD_Yaris	Performance Modifications	17	08-12-2006 02:07 PM

04-05-2010, 04:17 PM	#34
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	civic, lancer, g5/cobalt, fit, versa, corolla, and too many others to think about....o, there is one more...the smart car lol any way, you got a lot more to go, you still got: carpets non-essencial glass can be changed to lexan or poly carbon fiber or fiberglass door skins CF hatch headliner removed door panels with sheetmetal or fiber center console lightweight seats FG dash radio and speakers, amp if you got it can go excess wiring can be trimmed wires re-routed and trimmed (instead of a switch on left and right side windows you can move to the center) replace steel parts with aluminum trim up control arms and knuckles... there's tons of stuff you can still do to reduce weight. not saying any of it will be cheap or look good, but you still got a long way to go before you got no options left.