General Discussion 808 Thread - Toyota Yaris Forums

battleversiontc · 04-26-2009, 08:22 AM

engine parts list so far for the yaris
weapon r intake manifold for the xb but may work for the yaris just gotta cutt the flange and weld an angle but since im going booseted dont really matter to much straighter the better
crower fi connecting rods
head p&p
pnp 550cc injectors
cp pistons 75.5mm 9.0:1 pistons over sized
stock engine block steel sleeved
crank rods piston all balanced
stock crank
mishimoto intercooler
garrett t3 60-1 may go to a t3/t4
nst pulley set
2.5in downpipe for now just down pipe
2.5in intercooler piping
still auto trans redone by kalakaua trans. hopefully wont blow up like my tc one did the first time
trans cooler
convertor been stalled to 3000 by kalakaua trans shop
still need some way to tune it but havent figured anything yet
still need an exhaust and boost controller and blowoff and wastegate

then motor can go back together

did order a bc stroker kit for the tc to bring it to 2.7l have been talking to bc to find out if i send them my cams if they can make me one to a custom spec and my crank so i dont have to worry about snaping it

04-26-2009, 08:22 AM	#11
battleversiontc View User's Garage Drives: 08 vip yaris Join Date: Oct 2008 Location: 808 Posts: 501	engine parts list so far for the yaris weapon r intake manifold for the xb but may work for the yaris just gotta cutt the flange and weld an angle but since im going booseted dont really matter to much straighter the better crower fi connecting rods head p&p pnp 550cc injectors cp pistons 75.5mm 9.0:1 pistons over sized stock engine block steel sleeved crank rods piston all balanced stock crank mishimoto intercooler garrett t3 60-1 may go to a t3/t4 nst pulley set 2.5in downpipe for now just down pipe 2.5in intercooler piping still auto trans redone by kalakaua trans. hopefully wont blow up like my tc one did the first time trans cooler convertor been stalled to 3000 by kalakaua trans shop still need some way to tune it but havent figured anything yet still need an exhaust and boost controller and blowoff and wastegate then motor can go back together did order a bc stroker kit for the tc to bring it to 2.7l have been talking to bc to find out if i send them my cams if they can make me one to a custom spec and my crank so i dont have to worry about snaping it __________________ 08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified Last edited by battleversiontc; 04-26-2009 at 08:38 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OFFICIAL Yaris SEDAN thread	SimmZ	Photo-Video-Media Gallery	1706	06-22-2025 06:33 AM
Sedan Styling thread v.2	tuckevalastin	Cosmetic Modifications (Exterior/Interior)	254	09-29-2022 08:05 PM
Aftermarket rim thread vs official wheel guide	regal	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	04-01-2009 01:11 PM
Expressions and Explanations thread.	MAD DOG	Off-topic / Other Cars / Everything else Discussions	0	11-09-2008 06:55 PM
Post Whores-aka Yaris chat thread	Black Yaris	Off-topic / Other Cars / Everything else Discussions	21	07-12-2007 06:37 PM