Advice on harness

[fxny12004]

Originally Posted by N9QGS

I hope you can use the Pioneer HU in your Yaris, I was not able to in mine; cause I had the integrated stereo in the S model, and when you pull that out you have no supports for a radio, and Metra only makes it for the single din.... :-( Probably have to order quite a bit of stuff from Toyota to make your car accept a double din, I think your okay if you get the cheaper model Yaris with the "factory" radio. Good luck - Ron

Oh man, now you have me worried. I have the S model with the intergrated radio too. I do appreciate the warning though.

But i bought Metras Double Din trim plates pictured here (which i thought was the support system)---> http://www.amazon.com/Metra-95-8202-.../dp/B000K52CY2 and toyota's oem center bezel (silver outside trim piece) from my dealer.

Im i missing something here? If i cant get this damn pioneer in my car i think im going to !!!!!!!

Can anyone else confirm this? Do i need anything else to mount the HU?

Also on another note, i think im just going to take metra's smart harness and just cut the universal plug off, and crimp that end of the wires to the harness that the pioneer unit brings. is crimping ok?