Fog light question

[heeroyuy01195]

Originally Posted by CTScott

Yes. To make it easier for tapping the wires together (so you are tapping same sized wires together), connect the wire from pin 4 to pin 7 (the smaller white wire with a black stripe, 3rd from the right in the picture above).

Thanks for all of the info, so just to clarify...I should connect the wire from pin 4 to pin 7 and NOT pin 11 like in the earlier post? I have HIDs in my foglights as well. The kit that I used has a connector on the relay harness that plugs into one of the foglight plugs that the bulb normally plugs into (doesn't matter which) and then power is tapped from the battery with a ground wire connected. The HID bulbs are connected tot he ballasts which are connected to the relay harness. I hope that wasn't too confusing lol.