Yaris Sedan Deadening and Sound system upgrade

[sqcomp]

Well, the Bit One didn't make an appearance outside the storefront. We talked about placement and wire runs.

There was a lot of work to "finish" the kicks. All I really have to do now is to thread-sert the baffles and rattle can some black the baffles as well. Then it's carpeting for them.









We worked on the sub enclosure as well...





The next part is fleecing the ring. I had to let the wood glue on the supports cure. So I couldn't do too much tonight.

We're hemming and hawing about how to place the amplifiers...whether to angle them or place them horizontally. If we place them horizontally, we have enough space to have the S4b floating in between and "above" the two S2b amps...and it'll look like an entire heat sink...RAWR! :)

The Bit one will be on the cabin side of the pass through is what we're thinking about doing.

What is it going to do for me? The equalizer is 31 band 1/3 octave per output channel (in expert mode) that can be set for each individual channel or for linking the left/right respective channels (i.e. left and right front tweeters). TA adjustments are made in .2 dB increments to + or - 12 dB. Once you have all of your tuning done you simply finalize the setting to the processor and you are good. You can save the setting to you computer (just in case.) you have a total of four setups you can program in. Another nice feature is the Dynamic EQ for the subwoofer. For lack of a better term this is a highly adjustable loudness feature. Crossover Filter types are 12 / 24 / 36 / 48 dB Linkwitz & 6 / 12 / 18 / 24 / 30 / 36 / 42 / 48 dB Butterworth filters.

What does that mean? I'll have steeper crossover slopes, more specific EQ control, and TA control over the deck alone.