Wires Inside the Yaris & What They Do - Page 2 - Toyota Yaris Forums

charleschia1986 · 10-20-2009, 12:11 PM

Quote:

Originally Posted by CTScott

The connector (4K) on the upper left in this picture, is the feed to the map and dome lights. White with a black stripe ground, Pink is the "door open" switched ground, and blue is 12V fed from the DOME fuse.

hi there,
may i know where can i find this stuff?

regards,
Charles

CTScott · 10-20-2009, 01:26 PM

Quote:

Originally Posted by charleschia1986

hi there,
may i know where can i find this stuff?

regards,
Charles

If you mean where are the wires in the picture, they are right behind the pull out pocket on the bottom left of the dash.

charleschia1986 · 10-20-2009, 09:39 PM

Quote:

Originally Posted by CTScott

If you mean where are the wires in the picture, they are right behind the pull out pocket on the bottom left of the dash.

hi there,
so did ya mean it is located under the driver seat or passenger seat? because my driver seat is on right hand side.
regards,
Charles.

charleschia1986 · 11-24-2009, 01:04 AM

Quote:

Originally Posted by CTScott

The connector (4K) on the upper left in this picture, is the feed to the map and dome lights. White with a black stripe ground, Pink is the "door open" switched ground, and blue is 12V fed from the DOME fuse.

Hihi, I already tested the wires tat u mentioned in the picture.. The blue wire does give constant 12v and the pink wire should turn on the lights with the door right?
I already tested the pink wire by multimeter and it will only give 12v when the door is closed.
So may I know what can I do in order to get 12v out when the door is open because I want my led to be on only when the door is open...

Thanks...

CTScott · 11-24-2009, 06:56 AM

Quote:

Originally Posted by charleschia1986

Hihi, I already tested the wires tat u mentioned in the picture.. The blue wire does give constant 12v and the pink wire should turn on the lights with the door right?
I already tested the pink wire by multimeter and it will only give 12v when the door is closed.
So may I know what can I do in order to get 12v out when the door is open because I want my led to be on only when the door is open...

Thanks...

Use the pink as ground and the blue as your +12V.

charleschia1986 · 11-24-2009, 11:55 AM

thanks a lot...

i tried and it WORKS.....

thank scott

jonimac · 06-09-2010, 10:47 AM

Quote:

Originally Posted by CTScott

The connector (4K) on the upper left in this picture, is the feed to the map and dome lights. White with a black stripe ground, Pink is the "door open" switched ground, and blue is 12V fed from the DOME fuse.

Hi to all... just a noob here in M.E., just wondering if I tap the leads (+,-) of an LED light to the pink n blue from that pic above, will the new led light acts the same as the dome light? will the new led light dim to off as well upon turning off the ignition? Or just turns on when the doors were open? Sorry to much question. Need help where I can tap my led lights so that it behaves the same like the dome light, using its switch also to turn on my led lights underneath. Thanks so much. -jon

CTScott · 06-09-2010, 11:02 AM

Quote:

Originally Posted by jonimac

Hi to all... just a noob here in M.E., just wondering if I tap the leads (+,-) of an LED light to the pink n blue from that pic above, will the new led light acts the same as the dome light? will the new led light dim to off as well upon turning off the ignition? Or just turns on when the doors were open? Sorry to much question. Need help where I can tap my led lights so that it behaves the same like the dome light, using its switch also to turn on my led lights underneath. Thanks so much. -jon

If you tap the pink and blue, the LEDs will behave the same as them dome lights, provided that you leave the dome light switch in the "Door" position. If you manually switch the dome to "On", with the doors closed, the LEDs won't light up with the dome.

jonimac · 06-09-2010, 04:56 PM

Quote:

Originally Posted by CTScott

If you tap the pink and blue, the LEDs will behave the same as them dome lights, provided that you leave the dome light switch in the "Door" position. If you manually switch the dome to "On", with the doors closed, the LEDs won't light up with the dome.

Thanks CTScott... got the idea!

iicaie · 03-19-2011, 07:44 AM

Quote:

Originally Posted by CTScott

If you tap the pink and blue, the LEDs will behave the same as them dome lights, provided that you leave the dome light switch in the "Door" position. If you manually switch the dome to "On", with the doors closed, the LEDs won't light up with the dome.

Hi, how do you suggest wiring LEDs so that they behave exactly like the dome light does? ie. turn on when doors open, switch to ON - light up with dome light. thanks

47_MasoN_47 · 08-18-2009, 11:39 AM

Alright, so if I'm thinking correctly I should connect the + lead from the lights to the blue wire, and the ground to the pink one?

CTScott · 08-18-2009, 12:14 PM

Quote:

Originally Posted by 47_MasoN_47

Alright, so if I'm thinking correctly I should connect the + lead from the lights to the blue wire, and the ground to the pink one?

Correct.

Sora65 · 10-22-2009, 06:15 PM

Quote:

Originally Posted by CTScott

Correct.

Wait so i can put for than 1 wire in that hole?
Or should i use on of those clip things to wire?

i have no idea about wiring stuff :(
but i really wanna get some lights for the foot area..

CTScott · 10-22-2009, 08:32 PM

Quote:

Originally Posted by Sora65

Wait so i can put for than 1 wire in that hole?
Or should i use on of those clip things to wire?

i have no idea about wiring stuff :(
but i really wanna get some lights for the foot area..

Use the clip things (tap splices). Just sticking the wire in along side of the existing wire does not make a reliable connection.

47_MasoN_47 · 08-18-2009, 12:38 PM

Awesome, thanks!

Liu997 · 08-21-2009, 07:33 PM

So the yellow 12volt wire described in the first post is constant even when the car is off?

CTScott · 08-21-2009, 10:03 PM

Yes

kompressorgpl · 09-19-2009, 05:56 AM

Hello! I have an alarm to put on my Yaris (from 2002). Where i can find a diagram of the car with that?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Cruise Control FAQ (2006-2010 Yaris)	CTScott	DIY / Maintenance / Service	468	11-19-2024 03:45 PM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
2012 Yaris at SEMA	Jason@SportsCar	Third Gen Yaris General Discussion	5	09-23-2013 03:55 AM
New Yaris race car	Jason@SportsCar	Tracking, Racing, Auto-X Forum	83	11-01-2012 02:32 PM

11-24-2009, 11:55 AM	#6
charleschia1986 Drives: Yaris RUSH HatchBack Join Date: Jan 2009 Location: Perth, WA Posts: 80	thanks a lot... i tried and it WORKS..... thank scott

08-18-2009, 11:39 AM	#11
47_MasoN_47 What I thought I'd do was View User's Garage Drives: 09 Yaris Sedan Join Date: Aug 2009 Location: Northwest Alabama Posts: 1,140	Alright, so if I'm thinking correctly I should connect the + lead from the lights to the blue wire, and the ground to the pink one?

08-18-2009, 12:38 PM	#15
47_MasoN_47 What I thought I'd do was View User's Garage Drives: 09 Yaris Sedan Join Date: Aug 2009 Location: Northwest Alabama Posts: 1,140	Awesome, thanks!

08-21-2009, 07:33 PM	#16
Liu997 Drives: 2008 Red Yaris LB Join Date: Nov 2008 Location: Hicksville, LI Posts: 125	So the yellow 12volt wire described in the first post is constant even when the car is off?

08-21-2009, 10:03 PM	#17
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,450	Yes

09-19-2009, 05:56 AM	#18
kompressorgpl Drives: yaris 1.0 vvt-i Join Date: Oct 2008 Location: Portugal Posts: 3	Hello! I have an alarm to put on my Yaris (from 2002). Where i can find a diagram of the car with that?