Adjusting rear camber??

[Black Yaris]

rear alignment shims for the Yaris can be found at Napa for $30 each
you just have to pay the going rate for an alignment

[Tamago]

Originally Posted by Black Yaris

rear alignment shims for the Yaris can be found at Napa for $30 each
you just have to pay the going rate for an alignment

unfortunately they're plastic.

i use 1/2" stainless steel flat washers (about .060" thick) under the lower bolts. install then drive to the alignment rack, and then torque to achieve desired camber/toe.

stainless washers can be had at Ace hardware. i buy mine 25 at a time from Fastenal.

you will have to grind one edge of the washer flat so that it clears the hub.

if interested, i will sell anyone here 4 stainless washers (two each side) that are already ground and ready to install for $8 shipped in the continental US.