What could cause the difference in rear toe? - Toyota Yaris Forums

detroiter · 01-12-2010, 10:51 AM

I lowered the arms to the lower hole, so everything's back to factory specs. According to the printout I got from the alignment place, .28 is still within tolerance. I believe it was from .03 to .31 that is tolerable. I just wonder why such a wide variance.

Shroomster · 01-12-2010, 11:36 AM

Quote:

Originally Posted by detroiter

I lowered the arms to the lower hole, so everything's back to factory specs. According to the printout I got from the alignment place, .28 is still within tolerance. I believe it was from .03 to .31 that is tolerable. I just wonder why such a wide variance.

probably because they adjusted it. <not sarcasm.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 07:03 AM
Another rear spring option! Honda Fit springs!!	kngrsll	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	29	10-23-2009 05:02 PM
Rear toe adjustment...shims??	ozmdd	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	0	10-15-2009 10:32 PM
Hyperco 5.5" single pigtail rear spring test	kngrsll	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	33	06-15-2009 10:11 AM
Difference b/w TRD Rear Sway Bar and these?	IsLNdbOi	Performance Modifications	8	11-11-2008 09:13 PM

01-12-2010, 10:51 AM	#1
detroiter Drives: 2008 Polar White LB Auto Join Date: Oct 2008 Location: Metro Detroit Posts: 1,238	I lowered the arms to the lower hole, so everything's back to factory specs. According to the printout I got from the alignment place, .28 is still within tolerance. I believe it was from .03 to .31 that is tolerable. I just wonder why such a wide variance.