FS: OEM Cruise Control Stalk with Wire and Screws

[YAR1S]

Is this DIY fairly easy or difficult?

[CTScott]

Originally Posted by YAR1S

Is this DIY fairly easy or difficult?

It's fairly easy. On your 08 it would require adding the pin to the ECM connector, running the wire through the passenger side firewall grommet and under the dash, across to the steering column, adding the two pins to the connector on the column, removing the airbag, drilling the 1" hole for the stalk in the lower steering wheel cover, mounting the stalk, and moving the horn wire from the existing connector to the stalk's connector.

No one has written up a soup to nuts DIY on doing an OEM stalk on an 07 or older, but all of the pieces mentioned above are detailed in the DIYs linked to in this thread:

http://www.yarisworld.com/forums/showthread.php?t=25515

[timmay]

With all of Scott's posts and fast shipping, I will have CC before my payment books arrive. He is a real stand-up guy, thanks.