Valve Adjustment - Toyota Yaris Forums

DMZ · 01-21-2013, 12:21 AM

If you know the size of the shims, the diameter, not the thickness, say 10mm. Check with a motorcycle shop for a kit. You can get a variety of sizes for about $25:

http://www.cyclebuy.com/shopping/hot...imkits_100.htm

Absolutely Red 12 · 01-21-2013, 12:32 AM

Quote:

Originally Posted by DMZ

If you know the size of the shims, the diameter, not the thickness, say 10mm. Check with a motorcycle shop for a kit. You can get a variety of sizes for about $25:

http://www.cyclebuy.com/shopping/hot...imkits_100.htm

You obviously havent read this thread completely, the 1NZ-FE does NOT use shims, they use variable size lifters.

01-21-2013, 12:21 AM	#1
DMZ Drives: 2007 Yaris LB Join Date: Mar 2011 Location: E. Oregon Posts: 130	If you know the size of the shims, the diameter, not the thickness, say 10mm. Check with a motorcycle shop for a kit. You can get a variety of sizes for about $25: http://www.cyclebuy.com/shopping/hot...imkits_100.htm __________________ 2007 LB W/Cold Wx Package

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VALVE ADJUSTMENT INTERVAL	jemmah	DIY / Maintenance / Service	7	10-12-2016 10:13 AM
Valve Noise	barryware	DIY / Maintenance / Service	25	02-13-2013 02:39 PM
Valve lifter Problem !!!	Patocine	DIY / Maintenance / Service	6	05-08-2012 11:09 AM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 06:38 PM
Adjustment to the upper shock mounting point?	Goose	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	5	06-07-2010 03:41 PM