need help: foglight indicator - where are the wires?

[CTScott]

Originally Posted by jcboy

Ok thanks thats what i did earlier, but i unscrewed the 9 or 11 screws instead, trying to find out the same thing--that didnt take me anywhere haha. Ok i will try what you said later, but that wouldnt make the needle have to come off now, would it?i was scared about that, thats why i opted the former to try to make the back come off.

Here's what I mean. You don't need to pull the needles to look. I have the symbol lit in the picture, but you can just lift the plastic card to see if there is an LED under it or if there is an empty area of white plastic.

Front Fog symbol.jpg

[jcboy]

Originally Posted by CTScott

Here's what I mean. You don't need to pull the needles to look. I have the symbol lit in the picture, but you can just lift the plastic card to see if there is an LED under it or if there is an empty area of white plastic.

Attachment 49671

Thats a nice looking gauge btw. That LHD and optitron?

[CTScott]

Originally Posted by jcboy

Thats a nice looking gauge btw. That LHD and optitron?

That's actually a RHD one.